FAN-9T Thermostatic Ceiling Fan Light Remote Control Kit for Hampton Bay Hunter,w/Receiver Fan Timer Key LCD Display Temp 3-Speed, Replacement for FAN-9T L3HFAN-9T, No Dimmer No Reverse

Need to Know Before Buying

Before you begin the installation of your new remote control, make sure the ceiling fan is set to the highest speed.

Note: This Model FAN-9T FAN28R(7+5 F) ceiling fan remote system is compatible with most ceiling fans except those that have built in remote system.

No Light Dimming, No Reverse.

Note: This remote system is not designed for fan forward/reverse function, for fan reverse function, stop the fan first, and then manually change the position of reverse switch located on the fan body.

Note: Please check the size of the canopy to ensure there is enough space to install the receiver.

TROUBLE SHOOTING GUIDE

1. Fails to operate

a. Power to receiver ?

b. Receiver wired correctly ?

c. Fan manual speed control in highest position

d. Light kit switch turned on ?

e. Good battery in the transmitter ?

f. Code set at exact same positions in both transmitter and receiver ?

2. Won't operate at distance

If transmitter operates fan/light kit when up close, but not at 20 feet away.

Try placing the brown antenna wire higher, up through ceiling/outside the junction box.

Package included:

1 x Remote(Transmitter)

1 x Receiver

6 x Plastic wire connector

2 x Screws

1 x Manual

NOTICE !

Your ceiling fan and light kit assembly must meet the following requirements:

1. Do not use with solid state fans.

2. Electrical rating: 120v 60Hz 3.5A

MAX. Motor amps: 1.0

MAX. Light watts: 240