Skip to main content
  • $9.99
  • Free 30-day Returns
  • Price alert
    Shop it at NeweggBusiness.

    Meet Your Seller

    ARCTIC TP-3 (120x20mm - 1.5mm - 4 pcs) Premium Performance Thermal Pad ACTPD00057A

    • Part Number : ACTPD00057A
    • UPC : 840033401814
    +
    +
    Overview
    Specs
    Reviews (1)
    See all Q & A

    Any questions? Ask CelesteSM will help you find out quickly.

    ARCTIC TP-3 (120x20mm - 1.5 mm - 4 pcs) Premium Performance Thermal Pad ACTPD00057A

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...

    The ARCTIC TP-3 ACTPD00057A is a thermal pad set with four 120 × 20 mm pads, each 1.5 mm thick, for PC builders and repairers who need a thermal interface between components and a heatsink.

    Recommended For

    • PC builders replacing pads on RAM sticks or chipset components that need a 1.5 mm interface; ARCTIC says its 120 × 20 mm strip can fit most standard-size RAM sticks without extra cutting.
    • GPU owners replacing VRAM or VRM pads during a repair who have confirmed that 1.5 mm is the required thickness; the soft, compressible material is intended to accommodate uneven surfaces and component-height differences.
    • PC or electronics repairers who need to cut pads to size for small components, such as ICs or chipsets, and want an electrically insulating interface rather than a conductive material.
    • Laptop or console repairers replacing a pad between a component and its heatsink, provided the device’s service guidance or original pad confirms a 1.5 mm fit.

    Real-World Use Scenarios

    • When replacing worn or damaged pads on a graphics card’s VRAM or voltage-regulator components, users can cut the TP-3 to fit and use it to bridge the component-to-heatsink gap; the soft material can conform to uneven surfaces, but the thickness must match the card’s design to avoid poor contact or excess pressure.
    • When fitting an M.2 SSD under a motherboard heatsink, users can trim a strip to cover the drive; when the pad makes proper contact, it provides a thermal path to the heatsink, though the result depends on the heatsink and the gap being filled.
    • During laptop repair or maintenance, users can cut the pad for supported memory, chipset, or other IC surfaces that contact a heatsink; its compressibility helps accommodate small surface-height differences, but it is not a substitute for thermal paste where the gap is nearly zero.
    • When refreshing thermal pads on a motherboard chipset or other covered IC, users can cut the sheet to the contact area; the pad fills the small gap to the heatsink, provided its thickness is appropriate for that hardware.

    Spec Summary

    AttributeValue
    Best ForThermal-pad applications requiring four 120 × 20 × 1.5 mm pads
    Pad Dimensions And ColorFour blue thermal pads, each measuring 120 × 20 × 1.5 mm
    Product Weight15 g
    PackagingOne package measuring 0.7 × 9.5 × 13.6 cm, with a package weight of 0.06 kg
    Brand And ModelARCTIC TP-3, model ACTPD00057A

    Reference Q&A

    Q: ARCTIC TP-3 vs. ARCTIC TP-2: which should I choose?

    A: Choose ARCTIC TP-3 if you want a softer, more flexible pad that adapts to differences in chip height. In Igor’s LAB’s direct test, TP-3 was more adaptable than the older TP-2; both are ARCTIC silicone-based thermal pads.

    Q: Should I get the 1.5 mm or 1 mm ARCTIC TP-3?

    A: Choose the thickness that matches the gap between the component and heatsink: ARCTIC recommends a pad thickness at or just above the measured gap. For example, its manual recommends 1.5 mm for a 1.2 mm gap and 1 mm for a 0.9 mm gap.

    Q: ARCTIC TP-3 1.5 mm vs. 0.5 mm: which thickness fits my build?

    A: Use the 0.5 mm TP-3 for a smaller measured gap and the 1.5 mm version for a larger one. ARCTIC says its 0.5 mm pad can compress to 0.3 mm; for other gaps, select thickness based on the measured space and the device’s pad layout.

    Q: ARCTIC TP-3 120×20 mm strips vs. a 100×100 mm sheet: which format should I buy?

    A: Choose the 120×20 mm strips when their narrow shape suits the areas you need to cover; choose the 100×100 mm sheet when you want a larger, cut-to-shape piece. Both are TP-3 formats, so choose the thickness separately to match the measured gap.

    Q: How do I know whether the 1.5 mm thickness will fit my device?

    A: Buy it only if your device calls for a 1.5 mm thermal pad. Thermal-pad thickness is application-specific, so check the device’s service documentation or the original pad before replacing it; the package contains four 120 × 20 mm pads.

    Q: Can I cut the pads to fit smaller components?

    A: The product listing specifies four 120 × 20 mm pads but does not state whether they can be trimmed. Check the ARCTIC TP-3 installation instructions before cutting or installing them.

    Q: Is this a good choice for replacing a thermal pad on a GPU, SSD, or other component?

    A: It may suit a component that uses a thermal pad, provided the required thickness is 1.5 mm and the pad dimensions cover the needed area. Confirm the device’s specifications before replacing its existing pad.

    Q: Can I use this 1.5 mm pad to replace the pads on my GPU?

    A: Only if 1.5 mm matches the required thickness for your specific card and location. Reddit users report that pad thickness and heatsink contact can affect temperatures; check the device’s service information or measure the original pads before replacing them. This pack contains four 120 × 20 mm pads that can be cut to size.

    Q: Is the ARCTIC TP-3 suitable for GPU memory or VRM components?

    A: Reddit users report using TP-3 on memory and MOSFET/VRM components. Suitability still depends on the component’s required thickness and gap; this 1.5 mm version should not be treated as a universal fit.

    Q: Does the TP-3’s softness make installation easier, or can it cause problems?

    A: Its softness can help it conform to uneven surfaces and different component heights. Reddit users also caution that it can compress or stretch during installation, so trim it carefully and make sure it does not interfere with heatsink contact.

    Q: Will replacing my existing pads with TP-3 improve temperatures?

    A: Not necessarily. Reddit reports include both successful replacements and cases where temperatures worsened. Results depend on the device, correct pad thickness, and how well the heatsink makes contact, so a temperature improvement is not guaranteed.