This LBEAURG fingertip pulse oximeter is well made of high-quality material, large LCD display, easy to use, providing accurate and reliable readings. LBEAURG pulse oximeter is your best companion for regular measurement of blood oxygen saturation (SpO2), and pulse rate (PR).
LBEAURG is a recognized medical brand. As a professional medical device manufacturer, LBEAURG is committed to provide high quality medical devices and health care products for long time.
- As the direct manufacturer, our mission is to provide customers with the quality products.
Bright appearance, light weight, easy to carry.
Direct reading without button, fast measurement.
With soft silicon pad.
Display shows: blood oxygen saturation, Pulse Rate and pulse bar
Auto power-off after getting finger out.
Extra long standby time, one charge, one month standby.
Widely applicable for home daily use or non-clinical contexts, such as outdoor sports and aviation.
The package includes a Fingertip Pulse Oximeter, Wrist Cord, User Manual and a USB cable.
- Note: this device is only used for sports and aviation purposes, not intended for medical purposes
The Finger Pulse Oximeter is a quick and precise way to check pulse rates and blood oxygen saturation levels. Self-adjusting finger clamp plus directly reading without button design allows for easy operation. Small portable size makes it easy to handle and carry.
Fast and Reliable Measurement
The oximeter is professional medical device manufacturer-built, build in advanced chip and sensor, use improved SpO2 algorithm, so that you can get fast and accurate readings
High Quality
The blood oxygen saturation monitor is made up of high-quality ABS plastic and hypoallergenic medical grade silicone, and the finger chamber accommodates a wide range of finger sizes, which make you feel comfortable and safe when measuring your blood oxygen saturation and pulse rate.
Simple and User-friendly
Bright and large LED screen.
Rechargeable batteries, one charge for extra long standby.
Auto shut off as the finger putting out.
Package includes a USB cable, easy for recharge.
*Conduct SpO2 measurement on the finger smeared with nail polish; *Body or finger is in motion;
*Finger is not in the proper position; *Finger temperature is too low;
*Low blood perfusion; *Electromagnetic interference;
For the most accurate readings:
a. Make sure your fingers and hands are clean and dry.
b. Wiggle your fingers to circulate blood to them before placing finger into the device.
c. keep movement to a minimum and refrain from crossing arms or legs.
d. Make sure you're sated, and the oximeter is on a flat surface.
Please Note:
Index Finger is the most recommended. if it is too small to be detected, you could use middle finger or big thumb.
This LBEAURG fingertip pulse oximeter is well made of high-quality material, large LCD display, easy to use, providing accurate and reliable readings. LBEAURG pulse oximeter is your best companion for regular measurement of blood oxygen saturation (SpO2), and pulse rate (PR).
LBEAURG is a recognized medical brand. As a professional medical device manufacturer, LBEAURG is committed to provide high quality medical devices and health care products for long time.
- As the direct manufacturer, our mission is to provide customers with the quality products.
Bright appearance, light weight, easy to carry.
Direct reading without button, fast measurement.
With soft silicon pad.
Display shows: blood oxygen saturation, Pulse Rate and pulse bar
Auto power-off after getting finger out.
Extra long standby time, one charge, one month standby.
Widely applicable for home daily use or non-clinical contexts, such as outdoor sports and aviation.
The package includes a Fingertip Pulse Oximeter, Wrist Cord, User Manual and a USB cable.
- Note: this device is only used for sports and aviation purposes, not intended for medical purposes
How to Use a Finger Pulse Oximeter Scientifically and Correctly
(1) Finger Preparation Before Measurement: Ensure your fingers are warm. If your fingers are cold, rub them together to warm them or soak them in warm water and then wipe them dry. Cold extremities result in poor circulation, which may lead to low readings, inability to detect the pulse, or slow response.
Remove Obstacles: Thoroughly remove nail polish (especially dark colors such as black, blue, and purple), gel nails, and artificial nail tips. These can block light, leading to significantly low or inaccurate readings.
(2) Before Measurement: Ensure the battery is fully charged and that your body and mind are calm. Place your hand on a table or knee, keeping it roughly at heart level. Completely relax your arm and hand muscles. During the measurement, do not move your body, talk, or shake your arm or fingers.
Do not use a finger pulse oximeter during exercise, as the readings will be unstable. Allow 10-20 minutes to recover before measuring.
Finger Pulse Oximeter Measurement Results
When measuring, correctly clip the finger pulse oximeter onto your finger with your palm facing down. Insert the device like a clip, starting from the fingertip, with the nail side facing up, aligning it with the light source (red LED) inside the device. Your fingertip should gently press against the inner top of the oximeter, with the pad of your finger just covering the receiving sensor below.
Observe the screen. The values ??(especially the pulse) will fluctuate several times. Wait 10 seconds until the blood oxygen (SpO2) and pulse (PR) values ??stabilize and no longer fluctuate significantly. The numbers displayed at this point are valid readings. (This is a rechargeable pulse oximeter; the LCD screen and large font make it easier to read.)
What if the Finger Pulse Oximeter Fails to Power On or Charge?
If your finger pulse oximeter experiences issues such as failing to power on, failing to charge, or displaying incorrect readings, we will send you a new oximeter as a replacement. We are committed to providing comprehensive after-sales service to every customer.
The Finger Pulse Oximeter is a quick and precise way to check pulse rates and blood oxygen saturation levels. Self-adjusting finger clamp plus directly reading without button design allows for easy operation. Small portable size makes it easy to handle and carry.
Fast and Reliable Measurement
The oximeter is professional medical device manufacturer-built, build in advanced chip and sensor, use improved SpO2 algorithm, so that you can get fast and accurate readings
High Quality
The blood oxygen saturation monitor is made up of high-quality ABS plastic and hypoallergenic medical grade silicone, and the finger chamber accommodates a wide range of finger sizes, which make you feel comfortable and safe when measuring your blood oxygen saturation and pulse rate.
Simple and User-friendly
Bright and large LED screen.
Rechargeable batteries, one charge for extra long standby.
Auto shut off as the finger putting out.
Package includes a USB cable, easy for recharge.
*Conduct SpO2 measurement on the finger smeared with nail polish; *Body or finger is in motion;
*Finger is not in the proper position; *Finger temperature is too low;
*Low blood perfusion; *Electromagnetic interference;
For the most accurate readings:
a. Make sure your fingers and hands are clean and dry.
b. Wiggle your fingers to circulate blood to them before placing finger into the device.
c. keep movement to a minimum and refrain from crossing arms or legs.
d. Make sure you're sated, and the oximeter is on a flat surface.
Please Note:
Index Finger is the most recommended. if it is too small to be detected, you could use middle finger or big thumb.