Crestron CP4N 4-Series HighPerformance Rack-Mountable Control System (NOB)

Crestron CP4N 4-Series HighPerformance Rack-Mountable Control System (NOB)

Brand:   Crestron

Model:   CP4N

Product Type:   Control System

Condition:   New Open Box

NOTE:  "90-Day Warranty from Seller Only"

Ethernet:   100/1000 Mbps, auto-switching, autonegotiating, autodiscovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1xX, SNMP, BACnet and IP1, IPv4 or IPv6, Active Directory® service authentication, HTTPS web server, HTTPS web browser setup and XiO Cloud® client, SMTP email client

Cresnet Network:  Cresnet primary mode

USB:    Supports USB mass storage class devices via the rear panel USB 2.0 host port, supports computer console via the front panel USB 2.0 device port

RS-232/422/485:   For 2-way device control and monitoring, the COM port supports RS232 up to 115.2k baud with software handshaking, one port also supports RS422 or RS485 and hardware handshaking

IR/Serial:  Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0–5V) up to 115.2k baud

SDRAM:   2 GB

Flash:   8 GB

RELAY OUTPUT 1–8:  8-pin 3.5 mm detachable terminal blocks; Comprises (8) normally open, isolated relays; Rated 1A, 30VAC/VDC

COM 1:    5-pin 3.5 mm detachable terminal block; Bidirectional RS-232/422/485 port; Up to 115.2k baud; hardware and software handshaking support

COM 2–3:   3-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 ports; Up to 115.2k baud; software handshaking support

MEMORY:   SD memory card slot; Accepts one SD or SDHC card up to 32 GB for storage of log files

USB:    USB Type A connector, female; USB 2.0 port for storage devices

PWR:   Green LED, indicates operating power is supplied from the power pack or Cresnet power supply

NET:   Amber LED, indicates communication with Cresnet devices

MSG:   Red LED, indicates the control processor has generated an error message

HW-R:   Recessed push button for hardware reset

SW-R:   Recessed push button for software reset

LAN (rear):   Bicolor green/amber and (1) Amber LEDs; Green/amber LED indicates Ethernet link status and connection speed; Amber LED indicates Ethernet activity