Crestron DM-RMC-4KZ-100-C 4096x2160 DigitalMedia 8G+ 4K60 4:4:4 HDR Receiver & Room Controller 100

Crestron DM-RMC-4KZ-100-C 4096x2160 DigitalMedia 8G+ 4K60 4:4:4 HDR Receiver & Room Controller 100

Brand:  Crestron

Model:  DM-RMC-4KZ-100-C

Product Type:  Receiver & Room Controller

Resolution:  4096x2160 DCI 4K & 3840x2160 4K UHD

Video Input Signal Types:  DM 8G+ & HDBaseT w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support

Video Output Signal Types:  HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support (DVI compatible)

Video Copy Protection:  HDCP 2.2

Audio Input Signal Types:  DM 8G+, HDBaseT

Audio Output Signal Type:  HDMI

Audio Formats:  Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels

Ethernet:  10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP

RS-232:  2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system)

IR/Serial:  1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system)

DigitalMedia:  DM 8G+, HDCP 2.2, EDID, CEC, PoDM, Ethernet

HDBaseT:  HDCP 2.2, EDID, CEC, RS-232, PoE, Ethernet

HDMI:  HDCP 2.2, EDID, CEC

LAN:   8-pin RJ45 connector, female, shielded;10Base-T/100Base-TX Ethernet port

COM:   5-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support

IR 1 – 2:  4-pin 3.5 mm detachable terminal block; Comprises (2) IR/Serial ports; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud

24VDC 0.75A MAX:   2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2407WU power pack (optional, sold separately)

HDMI OUT:   HDMI Type A connector, female;HDMI digital video/audio output (DVI compatible

LAN:   LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity

RESET:   Recessed pushbutton, for hardware reset

SETUP:   Red LED and (1) recessed pushbutton, for Ethernet setup

24VDC:   Green LED, indicates operating power supplied via PoDM, HDBaseT PoE, or optional local power pack

DM IN:  LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence

HDMI OUT:   Green LED, indicates video signal presence at the HDMI