Your Browsing History
- Free 30-day Returns
$48.99
Meet Your Seller
DORHEA 6PCS ESP32 ESP-32S WiFi Development Board NodeMCU ESP-WROOM-32 Microcontroller 2.4GHz Dual-Core WiFi Bluetooth Processor Integrated Chip CP2102
- Dual core ESP-32 development board, 2.4GHz dual mode development board.There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode.
- The module is ESP-WROOM-32 module, the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable.
- ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
- The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal
- ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of th
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
High performance esp32 module
Small volume, easily embeded to other products
Supporting Lua program, easily to develop
Reference links of ESP32 at below:
https: /github. com/Nicholas3388/LuaNode
https: /github. com/nodemcu/nodemcu-firmware/tree/dev-esp32
Its often related to one of the following issues:
Poor quality USB cable; USB cable is too long;
Board with some defect (bad solder joints);
Bad computer USB port;
Or not enough power provided by the computer USB port.
When you open your motherboard IDE Serial monitor and the error message Brownout detector was triggered is constantly being printed over and over again.
It means that theres some sort of hardware problem.
Package included:
6 X ESP-WROOM-32 ESP-32S development board
Tips: When you download the program to ESP32, you need to press the IOO button for 1-2 seconds.
Small volume, easily embeded to other products
Supporting Lua program, easily to develop
Reference links of ESP32 at below:
https: /github. com/Nicholas3388/LuaNode
https: /github. com/nodemcu/nodemcu-firmware/tree/dev-esp32
Its often related to one of the following issues:
Poor quality USB cable; USB cable is too long;
Board with some defect (bad solder joints);
Bad computer USB port;
Or not enough power provided by the computer USB port.
When you open your motherboard IDE Serial monitor and the error message Brownout detector was triggered is constantly being printed over and over again.
It means that theres some sort of hardware problem.
Package included:
6 X ESP-WROOM-32 ESP-32S development board
Tips: When you download the program to ESP32, you need to press the IOO button for 1-2 seconds.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by Riveira Store Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...