Digitalinx DL-HDE100-H2 HDMI 2.0 HDBaseT Extension Set with Control and Ethernet; Complete Set Includes TX, RX, Power Supply, and IR Flasher/Emitter; Supports HDR10; HDCP 2.2 Compliant

Digitalinx DL-HDE100-H2 HDMI 2.0 HDBaseT Extension Set with Control and Ethernet; Complete Set Includes TX, RX, Power Supply, and IR Flasher/Emitter; Supports HDR10; HDCP 2.2 compliantThe DigitaLinx DL-HDE100-H2 HDBaseT extender set transmits HDMI 2.0 audio and video, up
to 4K@60Hz 4:4: 4/ 8 bit color with HDR support as well as control up to 100m / 330 using a single Category 6 cable. Supports HDMI 2.0 a, HDR10 and HDCP 2.2 as well as Dolby Atmos and
DTS: X audio formats. Control extension supports bidirectional IR, Ethernet pass through and RS232 pass through. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets. The DigitaLinx DL-HDE100-H2 can transport HDMI data rates up to 18Gbps up to 100 meters. Key Features- Complete set includes TX, RX, power supply, and IR flasher/emitter- Extend HDMI 2.0 signals up to 4K@60Hz/ 4:4: 4 up to 100m (4K 70m/1080P 100m)- Extends bi-directional IR, RS232 and ethernet pass through. Flexible PoC (Power on either end) - Supports HDR10- HDCP 2.2 compliant- Flexible power design (use power supply at TX or RX) - Includes re-clocking circuitry for maximum device compatibility- Locking power connector (power supply included)
Specifications- Maximum Pixel Clock: 600MHz-
Embedded Audio: Up to PCM 8 channel, Dolby Atmos, DTS: X, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital and DTS-
IR Carrier Frequency Range: 33-55kHz at 5 volts-
RS232 Baud Rate: Up to 115200 baud- Maximum Power Consumption 17 watts (TX) /16 watts (RX) -
Power Supply Input Voltage: 100-240V AC at 50-60 Hz-
Power Supply Output Voltage: DC 12V 2A-
Surge Protection:
Voltage: 1 kV-
Operating Temperature: - 0 to +45C-
Operating Humidity: TX/RX - 10% to 90%, Non-condensing-
Dimensions (WxHxD): TX / RX 5.90" x 0.62" x 3.75" -
Weight: TX/RX - 0.57 lbs