Note: 1. This product power from POE, need to connect with a 802.3AF Standard 48V POE Switch. 2. This camera default 5MP & H. 265, if your NVR do not support 5MP or H. 265, you can change our camera into 1080P (2MP) and H. 264.3. IP camera will create more heat and the case of this camera is small, so after you operate the camera for a while, you will feel the camera is hot. And do not worry, it is normal and safe, hope you can understand. * High Resolution 5.0 Megapixel 1/3'' CMOS Sensor* 5MP 2880*1620P resolution* Support POE, reduce the trouble of cable arrangement. * Have auxiliary power connector, can use like a Non-POE IP camera. * Also support H. 264 encode, so it can be compatible with both H. 264 and H. 265 device. * Support iPhone, Android smartphone* P2P Remote Viewing* Support web interface of IE 8.0 and above (device embedded Web Server), Edge, Chrome, Firefox, Safari browser. * Support Motion detection, Email Alarm function*
Metal Material ShellCameraModel:
I706-POE-TSResolution: 2880 x 1620P 5.0 Mega
Pixels cameraSensor: FH8852V310+GC5063Min
illumination: 0.1L ux @(F 1.2, AGC
ON)Frame rate:
20fpsLens: 3.6 mmO NVIIF compliant
Port: 8088Lens
interface type:
M12Shutter: 1/25 seconds -1/100, 000 secondsCompression
Format: H. 265/H.
264Compression rate output: 128
Kbps~8MbpsStorage: NVR or
ComputerIP address: Static (Default 192.168. 1.108 ) /
DynamicSmart alarm: Motion detection,
Email alarmSupport protocol: HTTP, TCP/IP, RTSP, RTP, UPNP, SMTP, DHCP, DDNS, DNS, FTP, NTP
General function: A key recovery, dual stream, password protection, video
hidingEthernet: 10M/100M mbps
Ethernet (RJ-45)GeneralOperating Temperature: -25C~60COperating
Humidity: 10%~90%Power
Supply: POE
Dimension (cm): 5.3
x 4.5 x 4cmWeight: 0.2
kgPackage contents: 1 x Camera1 x User manual1 x Screws Set