Your Browsing History
Meet Your Seller
DC DC Buck Boost Converter Variable Voltage Regulator CC CV 0.5-30V 4A 5V 6V 12V 24V Power Module Adjustable Voltage Regulated Laboratory Power Supply
Limited time offer, ends 07/19 By NovaStar Tech
- input voltage range is DC 5-30V; output voltage range is DC 0.5-30V, can be arbitrary adjustable; output current can be 3A for long term use, if enhance heat dissipation, it can reach 4A; max output power is 35W, if enhance dissipation, it can reach 50W; LCD displays input/output voltage, output current/output power/output capacity/output time.The module can be set to ON/OFF by default; Safe Protection: the module is with Anti-reverse connection protection of input end, so that it will not burn out when there is reverse connection.Anti-backflow protection at the output end. No need to add anti-backflow diode when charging. Multiple software protection mechanisms are available, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off; Application: the volt conversion board can be used as an ordinary buck/Boost module with over-current protection; used as a high-power LED constant current driver module; DIY a solar power controller, Battery Charging; Output ripple is small and filter is available.Thick heat sink .Buck-boost Integrated
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Input Voltage 5.0 -30V
Output Voltage: 0.5 -30V Operating Frequency 180KHZ Output Current It can work stably in 3A for a long time, and can reach 4A under enhanced heat dissipation Output Power natural heat dissipation 35W, enhanced heat dissipation 50W Voltage Display Resolution 0.01V
Current Display Resolution: 0.01A Size Length * width * height 79mm( 3.11 inch)*43mm( 1.69 inch)*26mm( 1.02 inch) Conversion Efficiency about 88% Soft Start Yes (large power with load module startup may fail) Protection Mechanism Input anti-reverse connection; Output anti-backpouring Input Under Voltage Protection 4.8 -30V Adjustable, default 4.8V Output Overvoltage Protection 0.5 -31V adjustable, 31V by default Output Over Current Protection Adjustable from 0 to 4.1A, default 4.1A Output Overpower Protection 0-50W adjustable, default 50W Over Temperature Protection 80-110? adjustable, default 110? Time-out Protection 0-100h adjustable, off by default Overcapacity Protection 0-60Ah adjustable, off by default Instructions for use Switching Display Parameters -- Under the normal interface, press SW to switch the down link display of the display screen, and the display content switches between current A, power W, capacity Ah, time h. Press and hold the SW button to switch the upstream display of the display. The display content switches between input voltage IN and output voltage OUT. Setting Output Voltage -- Press U/1 under the normal interface to enter the interface for setting voltage and constant
Output Voltage: 0.5 -30V Operating Frequency 180KHZ Output Current It can work stably in 3A for a long time, and can reach 4A under enhanced heat dissipation Output Power natural heat dissipation 35W, enhanced heat dissipation 50W Voltage Display Resolution 0.01V
Current Display Resolution: 0.01A Size Length * width * height 79mm( 3.11 inch)*43mm( 1.69 inch)*26mm( 1.02 inch) Conversion Efficiency about 88% Soft Start Yes (large power with load module startup may fail) Protection Mechanism Input anti-reverse connection; Output anti-backpouring Input Under Voltage Protection 4.8 -30V Adjustable, default 4.8V Output Overvoltage Protection 0.5 -31V adjustable, 31V by default Output Over Current Protection Adjustable from 0 to 4.1A, default 4.1A Output Overpower Protection 0-50W adjustable, default 50W Over Temperature Protection 80-110? adjustable, default 110? Time-out Protection 0-100h adjustable, off by default Overcapacity Protection 0-60Ah adjustable, off by default Instructions for use Switching Display Parameters -- Under the normal interface, press SW to switch the down link display of the display screen, and the display content switches between current A, power W, capacity Ah, time h. Press and hold the SW button to switch the upstream display of the display. The display content switches between input voltage IN and output voltage OUT. Setting Output Voltage -- Press U/1 under the normal interface to enter the interface for setting voltage and constant
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by NovaStar Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...