XKC-Y28 DC 5-24V Non Contact Liquid Level Sensor Induction Switch Water Detector

>>>Manual: Click here to open<<<

Product overview:

The intelligent non-contact liquid level sensor (hereinafter referred to as the liquid level sensor) adopts advanced signal processing technology and high-speed signal processing chip, which breaks through the influence of container wall thickness, and realizes the true non-contact of the liquid level in the closed container. Contact detection. The liquid level sensor (probe) is installed on the upper and lower sides of the outer wall of the container to be tested (the high and low levels of the liquid level), and the non-metallic container does not need to be opened, and the installation is simple and does not affect production. It can detect the level of various toxic substances, strong acids, strong alkalis and various liquids in high-pressure airtight containers. The liquid level sensor has no special requirements for the material of the liquid medium and container, and can be widely used.

XKC-Y28-NO/NC products are specially developed for non-metallic pipes (pipe outer diameter D11MM) or flat container liquid level detection. This series of liquid level sensors has two signal output interfaces, which are relay normally open output and relay normally closed output;

Normally open output interface Model: XKC-Y28-NO (5V), (12V), (24V)

Normally closed output interface Model: XKC-Y28-NC (5V), (12V), (24V)

Product features:

1. XCK-Y28-NO/NC sensor, suitable for non-metallic pipes (pipe outer diameter D11MM) or flat containers without direct contact with liquid, will not be corroded by strong acids and alkalis and other corrosive liquids, and will not be affected by scale or other The impact of debris.