YYI-2 5V 12V 24V Current Detection Module Current Limit Overcurrent Motor Blocking Protection Board Current Sensor Relay Board 5-24V DC

Specifications:

Product model: YYI-2 

Work Voltage: 

5-24V DC

Detection range: DC current between 0~10A

Detection accuracy: 0.01A (10ma)

Standby current: about 20ma

Relay output: It can control the on/off of DC line within 5A

With error calibration function, it can turn off display for a long time and reduce power consumption

Function Description:

P-11: When the measured current is greater than I1, the relay is closed; when the measured current is less than I1 again, the relay is disconnected.

P-12: When the measured current is greater than I1, the relay pulls in; always keeps the pull-in until the board is powered off.

P-21: When the measured current is greater than I2, the relay is closed; when the measured current is less than I1, the relay is disconnected.

P-22: When the measured current is greater than I2, the relay pulls in; always keeps sucking until the board is powered off.

P-31: When the measured is less than I1, the relay is closed; when the current is greater than I2, the relay is disconnected.

P-32: When the measured current is less than I1, the relay pulls in; always keeps the pull-in until the board is powered off.

P-41: When the measured current is between I1 and I2, the relay is closed, and the relay is disconnected in other cases;

P-42: When the measured current is between I1 and I2, the relay pulls in; always keeps the pull-in until the board is powered off.

P-51: When the measured current is less than I1 or greater than I2, the relay is closed, and the relay is disconnected in other cases;

P-52: When the measured current is less than I1 or greater than I2, the relay pulls in; always keeps the pull-in until the board is powered off.

Setting Instructions: