- Free 30-day Returns
Meet Your Seller
Cambo WRC-400 Camera Body with Tripod Mounting Block #99164000
- Small size 120 x 145mm (W x H) excl. handgrips and tripod mount
- Lightweight only 0.5 kgs (excl. lens, excl.handgrip, excl. tripod mount)
- Stitching possibilities (2-way)
- Milimeter scales for movements
- Movement indicators on rear sides
- Compatible with WDS and Wide RS
- Option for handgrips for steady holding
- 6 spirit levels visible from top or bottom
- Accessory mount for 2 point fixed accessories 4-sided
- Broad range of optics
- Retrofitting of user lenses offered
Any questions? Ask CelesteSM will help you find out quickly.
While the Wide Compact offers image-placement control movements, these will be by choice of orientation of the camera.
This results in an even smaller and lighter version of the Cambo Wide series. The Wide Compact body has the same accessory system support on all four sides, each accepting either one or two handgrips, a tripod mount, viewfinder, iPhone holder or the WRS-1090 Compendium.
The Wide Compact body accepts Hasselblad, MamiyaLeaf, Phase One and Sinar digital backs. Mounts are available for digital backs with Hasselblad V-series and H-series interface, as well as PhaseOne/Mamiya 645DF, Contax 645AF, Leaf AFi and Sinar HY6. It also accepts the full range of WDS lens panels that incorporate the Schneider Digitar and Rodenstock Digaron lenses. Choose from focal lengths ranging from 23mm up to 150mm and more on request.
The combination of perspective control, Cambo's optional tilt/swing lenspanels and stitching possibilties provide the photographer with a wealth of possibilities with this small and lightweight camera platform.
The Wide Compact can be used on a tripod or handheld for more spontaneous shooting situations. It also features six built-in spirit levels, an accelerated gear drive for the movements, cable release, optional accessory shoes for viewfinders or an iPhone holder and hooks for a neck strap. The tripod mount has 3/8" and 1/4" thread.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by Adorama Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
The Cambo WRC-400 is a compact, lightweight camera body for photographers building a medium-format digital imaging setup, with two-way stitching, movement scales and six spirit levels for controlled landscape and architectural photography.
Recommended For
- Architecture photographers who use a compatible digital back and lens system and need rear shift to adjust framing and control perspective on location.
- Landscape photographers traveling with a technical-camera system who want a compact body for deliberate, tripod-based compositions and stitched panoramas.
- Photographers already invested in compatible Cambo WDS/WRS lens panels and digital-back adapters who want a smaller body to carry alongside their existing system.
- Reproduction and archival photographers who need precise framing shifts or sensor-shift captures for larger or higher-resolution images, when configuring the compatible WRC system for that work.
Real-World Use Scenarios
- Photographing a building from street level, a photographer shifts the back to reframe the facade while keeping the camera level; this helps keep vertical lines from converging in the composition.
- Making a wider landscape panorama from a fixed tripod position, the photographer captures overlapping frames by shifting the camera; the images can be stitched into a broader view without panning the camera head.
- On a multi-day landscape hike, a photographer carries a technical-camera setup with a compatible digital back and lenses; its compact, lightweight body can make a shift-camera kit easier to carry than a larger system.
- Creating a high-resolution file of a stationary landscape or architectural scene, the photographer shifts between exposures and stitches them; this can capture more detail than a single frame, provided the scene stays still enough for stitching.
- Copying a large flat artwork or archival document, a photographer uses a compatible reproduction lens and digital back, then shifts the sensor to capture areas that do not fit in one frame or to make a higher-resolution composite.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Camera setups built around the WRC-400 body with tripod mounting support |
Reference Q&A
Q: Cambo WRC-400 vs WRS-1600: which is better for travel with a technical camera?
A: Choose the WRC-400 when keeping the camera body compact and light is the priority: it weighs 0.5 kg without the lens, and its 40 mm of movement is available as horizontal shift or vertical rise/fall depending on body orientation. Choose the WRS-1600 when you want both horizontal and vertical movements and integrated landscape-to-portrait rotation; it weighs 0.92 kg without the lens.
Q: Cambo WRC-400 vs WRS-1250: which should I choose for more camera movements?
A: Choose the WRC-400 for a 0.5 kg body with 40 mm of shift or rise/fall, selected by rotating the body. Choose the WRS-1250 when you want separate horizontal and vertical movements, two-way or four-way stitching, and included handgrips; its body weighs 1.0 kg without the lens.
Q: Cambo WRC-400 vs WRC-490 or WRC-491: which fits a specific digital back?
A: Choose the WRC-400 when you want a compact body with interchangeable rear interfaces for compatible digital backs. Choose the WRC-490 for its integrated Phase One/Mamiya interface, or the WRC-491 for its integrated Hasselblad CFV interface; both models also provide integrated portrait/landscape rotation of the camera and digital back.
Q: Is the WRC-400 suitable for travel and location photography?
A: It may suit photographers who need a compact technical camera for location work: the body weighs 0.5 kg before adding a lens, handgrip, or tripod mount, and supports horizontal or vertical shift depending on camera orientation. It is a specialized camera body, so the complete setup will weigh more and requires compatible lenses and digital-back components.
Q: What lenses and digital backs can I use with the WRC-400?
A: The WRC-400 is designed for compatible WDS and Wide RS lens panels and accepts digital backs through a suitable rear interface adapter. The specific panel, lens, and adapter depend on your equipment, so confirm compatibility before buying; the body listing does not establish that those parts are included.
Q: Can I mount the WRC-400 on a tripod?
A: Yes. The product listing describes a tripod mounting block with 3/8-inch and 1/4-inch mounting threads. Check that your tripod head or plate matches the mount and can support the weight of the complete camera setup.
Q: Can the digital back be mounted in portrait or landscape orientation?
A: A B&H answer for a WRC-400 kit confirms that its specified SLW-80 interface plate can be mounted in either portrait or landscape orientation. Verify that the interface included with your own setup supports the same orientations.
Q: Does the WRC-400 body come with a lens and digital-back adapter?
A: The product is listed as a camera body with a tripod mounting block. The listing does not establish that a lens or digital-back adapter is included, so check the selected package contents before purchasing.





