Question 1

Have there been any reported firmware bugs or performance issues with the ASUS GR701 ROG Hyperion case after recent BIOS or RGB controller updates?

Accepted Answer

There have been no widespread reports of firmware bugs or performance issues related to BIOS or RGB controller updates on the ASUS ROG Hyperion GR701. Its integrated ARGB lighting and internal hub for fan control typically function smoothly, supporting up to 6 PWM fans and 8 ARGB devices without known hiccups. The tool-free side panels and built-in graphics card holder remain unaffected by firmware changes.

That said, if you’re running multiple ARGB devices or complex lighting setups, occasional minor quirks can happen, as with any system involving centralized lighting control. Keeping the case’s internal firmware and your motherboard BIOS updated helps maintain compatibility, especially if you pair it with ASUS motherboards for seamless Aura Sync support.

Question 2

What are the best practices for managing power supply cables in the ASUS GR701 ROG Hyperion to maximize airflow and maintain clearance inside the case?

Accepted Answer

Keeping power supply cables well-managed in the ASUS ROG Hyperion GR701 is key to maximizing airflow because its semi-open design benefits from unobstructed paths for air to move freely. This case offers ample space and a tool-free hinged side panel, so routing cables neatly behind the motherboard tray and using the built-in storage drawer can help avoid clutter in the main chamber where airflow and component clearance matter most.

When organizing cables, balance neatness with flexibility, especially if you’re installing large radiators or multiple fans since tight bundles can restrict airflow or complicate future upgrades. Using Velcro straps or cable ties to keep cables flat and close to the frame will preserve clearance and maintain an easy build experience without blocking the front 420mm radiator mounts or the graphics card holder area.

Question 3

Is the ASUS GR701 ROG Hyperion case compatible with components from older ASUS ROG cases for an easy upgrade?

Accepted Answer

Compatibility depends mainly on the size and mounting standards of the components. The ASUS ROG Hyperion GR701 supports EATX motherboards and features a semi-open design that accommodates large radiators and GPUs, so most parts from older ASUS ROG cases should fit if they follow standard sizes and mounting points.

Keep in mind that newer features like the built-in graphics card holder and extra Type-C ports may not have direct equivalents in older cases, so certain accessories or layouts might differ. If your previous case was smaller or had a different internal layout, take care to verify clearances, especially if you’re upgrading water cooling setups or vertically mounting your GPU.

Question 4

How does the cooling performance of the ASUS GR701 ROG Hyperion case compare to the Lian Li PC-O11 Dynamic in handling multi-threaded CPU loads versus single-threaded tasks?

Accepted Answer

The ASUS ROG Hyperion GR701’s semi-open structure and support for two 420mm radiators generally give it an edge in cooling performance over the Lian Li PC-O11 Dynamic when handling multi-threaded CPU loads, which produce more heat. Its design promotes better airflow and radiator capacity, making it better suited for heavy CPU activities that generate sustained heat.

However, the Lian Li PC-O11 Dynamic excels in more compact airflow management and may be quieter under lighter, single-threaded tasks due to its enclosed panels. If noise or aesthetics under lighter loads is a priority, the Lian Li might feel more refined, but for raw cooling capacity in intense workloads, the ASUS GR701 pulls ahead.

Question 5

What accessories and components are included in the box with the CASE ASUS GR701 ROG HYPERION, and how is the initial setup process out of the box?

Accepted Answer

The ASUS ROG Hyperion GR701 package includes the case itself along with standard mounting hardware and screws needed for installing motherboards, drives, and fans. There’s also a built-in storage drawer that holds small parts during your build, making the setup straightforward. The hinged, tool-free side panels are designed to make initial access and component installation quicker and easier.

Keep in mind that while the case supports up to two 420mm radiators and has an internal hub for fans and ARGB lighting, you’ll need to source cooling components and other hardware separately. The semi-open design improves airflow but might let dust in more easily, so regular cleaning could be necessary depending on your environment.

Question 6

How does the semi-open structure of the ASUS ROG Hyperion GR701 improve airflow?

Accepted Answer

The semi-open structure of the ASUS ROG Hyperion GR701 enhances airflow by allowing for improved ventilation, and it supports up to 2 x 420mm radiators for effective cooling.

Question 7

What is the maximum GPU length supported by the ASUS ROG Hyperion GR701 case?

Accepted Answer

The maximum GPU length supported by the ASUS ROG Hyperion GR701 case is 460 mm.

Question 8

Is this compatible with BTF motherboards?

Accepted Answer

ASUS has a specific BTF case .. also a GR701 BTF ...

Type	E-ATX Full Tower Case
Color	Black
Case Material	Aluminum/Steel/Tempered Glass/ABS Plastic
Motherboard Compatibility	EATX (12"x10.9") ATX Micro-ATX Mini-ITX
Side Panel	with Side Window
Dust Filters	Bottom / Front / Top

Internal 3.5" Drive Bays	2 x 2.5"/3.5" Combo Bay
Internal 2.5" Drive Bays	5 x 2.5" Bay
Expansion Slots	9 3 (additional vertical)

Fan Options	Front: 3 x 120 mm; 3 x 140 mm Top: 3 x 120 mm; 3 x 140 mm Rear: 1 x 120 mm; 1 x 140 mm Side: 3 x 120mm Pre-installed Fans: Front: 3 x 140 mm PWM Rear: 1x 140 mm PWM
Radiator Options	Front: 120 mm/140 mm/240 mm/280 mm/360 mm/420 mm Top: 120 mm/140 mm/240 mm/280 mm/360 mm/420 mm Rear: 120mm/140mm Side: 120mm/240mm/360mm

Max GPU Length	460 mm
Max CPU Cooler Height	190 mm
Max PSU Length	240 mm
Dimensions	268 * 639 * 659 mm
Weight	20.8 Kg

Best Sellers

ASUS ROG Hyperion GR701 EATX full-tower computer case with semi-open structure, tool-free side panels, supports up to 2 x 420mm radiators, built-in graphics card holder,2x front panel Type-C

Learn more about the ASUS GR701 ROG HYPERION

Customer Reviews of the ASUS GR701 ROG HYPERION

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811173052