Question 1

Will this tower be able to hold an ASUS GTX M599FX Pro R2.0 motherboard?

Accepted Answer

Yes it can. Im currently using the ASUS Rampage IV Black Edition LGA 2011 Intel X79 SATA 6Gb/s USB 3.0 Extended ATX Intel Motherboard  and it fits fine .

Question 2

is this a computer or is it a case?

Accepted Answer

It's a case, as described in the title of the product. You put the computer's components inside it, it has a ton of room and looks really good.

Question 3

Does this come in the silver sided version, or the black one?
(First picture - Second picture)

Accepted Answer

Just white : http://www.newegg.com/Product/Product.aspx?Item=N82E16811517024&cm_re=AZZA_CSAZ-_XT1_B_white_Japanese_SECC_Steel_ATX_Full_Tower_Computer_Case-_-11-517-024-_-Product

Question 4

Will this hold a MSI Computer Corp. Motherboard ATX DDR3 1333 LGA 1150 Motherboards Z87-GD65 GAMING?

Accepted Answer

It holds my new Asus Sabertooth ATX motherboard just fine, any ATC should fit with more then enough room in this case, i love the case, one of the better quality cases ive seen.

Con: Top 230mm fan came not working, but thats a easy fix to replace it, but i still have yet to contact the support.

Question 5

I am wondering if this case will work with a liquid cooler with a 240mm radiator? or do i need to get the 120mm radiator?  i would prefer the 240mm one cause the price is almost the same as the 120mm one.

Accepted Answer

And AIO 240mm water cooler will fit in the top no problem. I even get a 280mm in there but it required some drilling/modding. I had a corsair h110 and it fit, so just make sure the rad isn't super thick.

Question 6

How many fans can this case hold in total?

Accepted Answer

This case comes with 3 fans, one on top, one on the side, and one in the back, and there is 1 . The 1 on the back I use a liquid cpu cooler, there is also one in the front to cool the hard drives. All in All you don't need any more fan this case is awesome and you don't have to purchase any other fans. Promise!

David

Question 7

How much (average) clearance does it have for a cpu heatsink/fan?

Accepted Answer

I just used the intel fan that came with the CPU so I can't give an accurate answer but if it is about the same size as the intel fan ull have plenty of space it's a pretty big case and It have lots of room to work with

Question 8

Does this case have enough room for a Corsair H105 73.0 CFM Liquid CPU Cooler? It's hard to tell if it will be able to fit in there properly the way the angles of the pictures are, and also how the front faceplate is kind of oddly shaped.

If anyone knows let me know!! That kind of hinders whether or not I'll be able to use this in my build or not. It's a beautiful case and I'd really like to use it.

Accepted Answer

The case is very open, so water cooling isn't really necessary; however it's a quiet and snazzy alternative to fans. There is room at the top of the case for two 200m fans, so you should be able to fit a 200mm radiator in the top. I will warn you that the top of the case is made of plastic and comes off very, very easily. If you are looking for a case better suited for cooling, I would check out the Corsair Carbide Series Air 540. It's got a ton of room for water cooling and custom wiring that will stay hidden from your components that heat up the most. It's a wider case and costs a little bit more, but worth every penny if space isn't an issue. Overall, keep in mind this Assa case is a little fragile at the top and front, and wire space in the back is less than an inch. It will fit water cooling barely, but I would recommend something else.

Question 9

i recently bought a "ASUS GTX750TI-OC-2GD5 GeForce GTX 750" however it was to big for my original case, would this case be big enough for it? if not then any suggestions?

Accepted Answer

This case should have room for the largest graphics cards. I believe you could have up to 4 GPUs, since the back of the case has 8 slots for expansion cards. (The case can support it, but of course, your MB is what really will determine how many GPUs you can install).

Question 10

does it support EATX Mobos?

Accepted Answer

Very doubtful, the ATX mobo i have in there takes up just enough space to slide in my power supply. I dont think it was made for any other, or anything bigger.

Exceptional Cooling System with a Total of Four Fans	1 x 230mm fan locate on top, exhaust the hot air out 1 x 140mm LED fan locate on the side intake the cool air 1 x 120mm LED fan located in the front for cool HDD 1 x 120mm fan locate in the rear, exhaust the hot air out
Easy Swap Slot for 3.5" HDD and 2.5" SSD	One Easy Swap HDD tray for easy HDD installation - no need to open side window or remove any screws to install HDD
Maximum Capacity Water Cooler Supports Longest VGA Cards	Supports up to 2 x 120mm water cooling radiators. Accommodate VGA card up to 340mm
USB 3.0 Ready	2 x USB 3.0, 2 x USB 2.0
Maximum Compatibility	Accommodates XL-ATX, Full ATX, Micro ATX and all kinds of NVidia and ATI VGA cards up to 340mm long.
Easy CPU Cooler Installation	Easy CPU cooler installation - no need to take out motherboard.

Brand	AZZA
Model	CSAZ- XT1 B

Type	ATX Full Tower
Color	Black
Case Material	Japanese SECC Steel
With Power Supply	No
Power Supply Mounted	Bottom
Motherboard Compatibility	Micro ATX / ATX
Side Panel	with Side Window
Dust Filters	Yes

External 5.25" Drive Bays	4
External 3.5" Drive Bays	1
Internal 3.5" Drive Bays	6
Expansion Slots	8

120mm Fans	1 x 120mm Fan in Rear
140mm Fans	1 x 140mm Red/Blue LED fan on the side 1 x 140mm LED in front
230mm Fans	1 x 230mm Red/Blue LED fan on the top

AZZA CSAZ- XT1 B Black Japanese SECC Steel ATX Full Tower Computer Case

AZZA Computer Case

Features

Gallery

Specifications

Learn more about the AZZA CSAZ- XT1 B

Customer Reviews of the AZZA CSAZ- XT1 B

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Dimensions & Weight
Dimensions	22.30" x 8.10" x 20.30"
Weight	22.00 lbs.

Item#: N82E16811517023