Question 1

Is the heat sink socket narrow type or square type?

Accepted Answer

Its normal 2011v3 not slim server socket so therefore any type of heatsink that supports 2011 socket can be used.

Question 2

Which heatsink should I order with this Mobo for use with Intel Xeon E5-2683 V4 CPU?

Accepted Answer

I used a Corsair H80 series water cooler. Just look at the CPU fans section, and drill down by 2011 v3. One of the cheap cooler masters, like the 212 evo, would perform fine assuming you have the room in the case.

Question 3

Does the motherboard support vps support?

Accepted Answer

Virtual Private Server is software driven -- called virtualization. Whereas I only use this as a single machine, I'm sure I could run the software.

Question 4

Can  this house 4 Nvidia V100's? I know it has 4 PCI3 x 16's , still wanted to be sure.

Accepted Answer

This motherboard fits three two slot PCI-E cards; the lower slot is unable to accommodate a fourth card in my experience. There is a heat sink behind the PCI-E slots which is low enough for the back of the GPU to pass over. I use this MB with 3 1080TI cards, occupying the top 3 slots.

Question 5

Does this board support non-ECC memory?

Accepted Answer

We only tested ECC registered and  unbuffered memory. Both types work. Non-ECC modules should not work based on the Chipset (C612).

Question 6

Can i post with an E5-2600 V4 processor to update the BIOS? I'm guessing no, but waiting is frustrating so i thought i would ask. Thanks for your help!

Accepted Answer

The new boards ordered from newegg.com come with BIOS 2.0 which supports V4 already. No need to do any upgrade.

Question 7

Hi is this motherboard out of the box, or used?
Does it support M.2 SSD?

Accepted Answer

It's a new motherboard. Does not have a M.2 slot. I've stopped using my board in favor of using a "real" server board but It worked well while it was in service

Question 8

Does it support Intel Xeon E5-2690 V4 ES QH2M 2.1GHz 14Core 35MB 135W LGA2011-3?

Accepted Answer

Based on the specification, it should support this CPU.

Question 9

Would this mobo work with two Nvidia GTX 1080 cards?

Accepted Answer

X10SRA doesn't support Nvidia SLI technology.

Question 10

Specs say four of the USB 3.0 slots can be upgraded to USB 3.1 (10Gbps rather than 6Gbps); however, this is listed as a "BOM option for OEM only," whatever that's supposed to mean.

Is it possible to get one of these motherboards with the USB 3.1 upgrade?

Accepted Answer

It's only for OEM customer.

Product SKUs
MBD-X10SRA -B	X10SRA (Bulk Pack)
Physical Stats
Form Factor	ATX
Dimensions	12" x 9.6", (30.5cm x 24.4cm)
Processor/Cache
CPU	Intel® Xeon® processor E5-2600/1600 v3 family or Intel® 4th gen. Core™ i7 series (up to 160W TDP **) Single Socket R3 (LGA 2011)
Core / Cache	Up to 18 Cores / Up to 45MB Cache
Note	** Motherboard supports this maximum TDP. Please verify your system can thermally support
System Memory
Memory Capacity	8x 288-pin DDR4 DIMM slots Up to 512GB DDR4 ECC LRDIMM Up to 256GB DDR4 ECC LRDIMM Up to 64GB DDR4 ECC/non-ECC UDIMM (available with Core i7 only)
Memory Type	2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM/LRDIMM) / 284-pin gold-plated DIMMs
DIMM Sizes	RDIMM: 32GB, 16GB, 8GB, 4GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset	Intel C612 chipset
SATA	SATA3 (6Gbps) via C612 controller RAID 0, 1, 5, 10 support
Network Controllers	Intel® i210-AT Dual Port Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio	RealTek ALC1150 High Definition Audio
Input / Output
SATA	10x SATA3 (6Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports
USB	8x USB 3.0 ports (6 rear + 2 via header) 4 of 8 USB 3.0 ports upgradable to 4x USB 3.1 (10Gbps) (2 rear + 2 via header) (This upgrade is BOM option for OEM only)
Audio	7.1 HD Jacks
Keyboard/Mouse	1 PS/2 Keyboard/Mouse port
Serial Port / Header	1x header
TPM	1x TPM 1.2 20-pin Header

Brand	SUPERMICRO
Model	MBD-X10SRA-O

CPU Socket Type	LGA 2011-3
CPU Type	Intel Xeon processor E5-2600/1600 v3 family (up to 160W TDP **)

Number of DDR4 Slots	8x 288-pin
DDR4 Standard	2133/1866/1600/1333MHz ECC DDR4 SDRAM 72-bit
Maximum Memory Supported	Up to 512GB DDR4 ECC LRDIMM Up to 256GB DDR4 ECC RDIMM
ECC Supported	Yes

SATA	10x SATA3 (6Gbps) ports
SATA RAID	0/1/5/10

SUPERMICRO MBD-X10SRA-O ATX Server Motherboard LGA 2011-3 Intel C612

SUPERMICRO MBD-X10SRA-O ATX Server Motherboard

Features

Specifications

Whats in the Box

Learn more about the Supermicro MBD-X10SRA-O

Customer Reviews of the Supermicro MBD-X10SRA-O

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

PCI Express 3.0 x16	4
Other Slots	4x PCI-E 3.0 x16 slots (runs at 16/16/NA/8 or 16/8/8/8) 2x PCI-E 2.0 x1 (in x4) slots

LAN Chipset	2x RJ45 Gigabit Ethernet LAN ports
Third LAN Speed	10/100/1000Mbps

PS/2	1 x PS/2 keyboard/mouse port
COM	2
USB 3.0	8x USB 3.0 ports (6 rear + 2 via header) 4 of 8 USB 3.0 ports upgradable to 4x USB 3.1 (10Gbps) (2 rear + 2 via header) (This upgrade is BOM option for OEM only)
Audio Ports	7.1 HD Jacks

Dimensions
Form Factor	ATX
Dimensions (W x L)	12.0" x 9.6"

Item#: N82E16813182958