Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 3.3ft LED numbers: 60 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Specifications: Addressable RGB Splitter Hub This splitter hub connects to the 3-pin 5V addressable RGB header or controller on your motherboard, allowing you to add 10 ARGB fans or strips for lighting synchronization via motherboard software. It is compatible with ASUS AURA SYNC, GIGABYTE RGB Fusion, MSI Mystic Light and ASRock RGB LED. An extra Molex power interface ensures stable power delivery for all the ARGB devices. Built-in PMMA case offers solid protection while the included sticky pad makes installation quick and easy. A 1ft RGB extension cable is also included for your convenience.
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Strip Length:19in per strip
Input Voltage:DC 5V Only support DC5V ,don't support DC12V
Waterproof Grade:IP30
Double-sided adhesive
Powered by 5V 3-pin RGB header on your computer motherboard
Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
Memory Standard: DDR5 7200(OC)/7000(OC)/6800(OC)/6600(OC)/ 6400(OC)/ 6200(OC)/ 6000(OC)/ 5800(OC)/ 5600/ 5400/ 5200/ 5000/ 4800 Non-ECC, Un-buffered Memory*
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
OptiMem II
* Supported memory types, data rate (speed), and number of DRAM modules vary depending on the CPU and memory configuration, for more information please refer to CPU/Memory Support under the Support tab or visit https://www.asus.com/support/
* Non-ECC, un-buffered DDR5 memory supports On-Die ECC function.
Specifications: Lighting Node PRO
Power input: 4.5V to 5.5V
Unit dimension: 55mm x 31mm x 12mm
RGB LED channels: 2
Max. RGB LED strip per channel: 4
Mini USB cable: 375mm
SATA Power cable: 440mm
HD RGB LED hub cable 485mm
Individually Addressable RGB LED strip
Length: 410mm
RGB LED chip count: 10
Protective cover: IP65-rated transparent silicone
Adhesion type: 4 magnets per strip and full-strip tape
RGB extension cable: 345mm