Specifications: Strip Length:19in per strip
Input Voltage:DC 5V Only support DC5V ,don't support DC12V
Waterproof Grade:IP30
Double-sided adhesive
Powered by 5V 3-pin RGB header on your computer motherboard
Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
M/B Adapter: Digital RGB adapter 3pin (+5V,Data,NA,GND)
Input Voltage: +5V
Current (Single strip): Max. 0.84A
Current (Dual Strip): Max. 1.68A
Wattage (Single strip): Max. 4.2W
Wattage (Dual Strip): Max. 8.4W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 28 LEDs (400mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 400 x 13 x 5.5mm (15.7 x 0.5 x 0.2in)
Scope of Delivery:
2 x 400mm (15.7in)...
Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 3.3ft LED numbers: 60 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Specifications: Type: 3 Strip RGB LED Control Pack
Form Factor: Slim Profile
Voltage: 12V
LED Strips: (3) RGB Magnetic LED Strip
Mounting: 6 Neodymium Magnets + 3M Adhesive
LED Lights/Strip: 12
Fans Channels: 5
LED Modes: Flash Mode (Blue > Green > Red > White > Orange > Yellow > Purple) and 256 Color Fade Mode
Buttons:
Customize Button (256 Color Mode)
Mode Button (Color Select/Flash)
Brightness Button (Adjust Brightness Levels / Power On/Off)
LED Strip Chaining Capable: Yes
Power Connector: (1) 4-pin Fan Header
Weight: 145g
Color: Black
Dimensions: 80 x 60 x 20 mm
Specifications: Material 12 pcs addressable RGB LED with magnetic strip and adhesive tape
Pin definition:
+5V, D, G*
+5V, D, NP, G*
Included Parts:
2 x Addressable RGB LED strip
1 x Motherboard connect cable**
1 x Splitter cable
Length: 300mm
Wattage: 3W (5V, 0.6A)
Tandem limits: Depend on controller
Remark:
* Please check the control box and motherboard pin header that you want to connect are the same as LS03’s pin definition.
** Included Motherboard connect cable supports SilverStone’s addressable RGB 3pin connectors and other market standard addressable RGB 3pin (three pin in four pin housing) connectors.
Specifications: Lighting Node PRO
Power input: 4.5V to 5.5V
Unit dimension: 55mm x 31mm x 12mm
RGB LED channels: 2
Max. RGB LED strip per channel: 4
Mini USB cable: 375mm
SATA Power cable: 440mm
HD RGB LED hub cable 485mm
Individually Addressable RGB LED strip
Length: 410mm
RGB LED chip count: 10
Protective cover: IP65-rated transparent silicone
Adhesion type: 4 magnets per strip and full-strip tape
RGB extension cable: 345mm
Specifications: Material: Plastic outer shell
Included Parts:
2 x SST-LS02 RGB LED strip
2 x Extend Y cable
1 x RGB 4pin signal cable
1 x 4pin peripheral cable
Signal input: a RGB 4pin host (+12V, G, R, B) or built-in IC control
Signal output: 8 x SilverStone custom RGB 4pin
Net weight: 1.06 oz.
Dimension: 0.75" x 1.81" x 3.35"
Memory Standard: DDR5 7200(OC)/7000(OC)/6800(OC)/6600(OC)/ 6400(OC)/ 6200(OC)/ 6000(OC)/ 5800(OC)/ 5600/ 5400/ 5200/ 5000/ 4800 Non-ECC, Un-buffered Memory*
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
OptiMem II
* Supported memory types, data rate (speed), and number of DRAM modules vary depending on the CPU and memory configuration, for more information please refer to CPU/Memory Support under the Support tab or visit https://www.asus.com/support/
* Non-ECC, un-buffered DDR5 memory supports On-Die ECC function.
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Addressable RGB Splitter Hub This splitter hub connects to the 3-pin 5V addressable RGB header or controller on your motherboard, allowing you to add 10 ARGB fans or strips for lighting synchronization via motherboard software. It is compatible with ASUS AURA SYNC, GIGABYTE RGB Fusion, MSI Mystic Light and ASRock RGB LED. An extra Molex power interface ensures stable power delivery for all the ARGB devices. Built-in PMMA case offers solid protection while the included sticky pad makes installation quick and easy. A 1ft RGB extension cable is also included for your convenience.
Memory Standard: DDR5 7200+(OC)/7000(OC)/6800(OC)/6600(OC)/ 6400(OC)/6200(OC)/6000(OC)/5800(OC)/ 5600/5400/5200/5000/4800MHz Non-ECC, Un-buffered Memory*
* Supported memory types, data rate (speed), and number of DRAM modules vary depending on the CPU and memory configuration, for more information please refer to CPU/Memory Support list under the Support tab of product information site or visit https://www.asus.com/support/
* Non-ECC, un-buffered DDR5 memory supports