Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
M/B Adapter: Digital RGB adapter 3pin (+5V,Data,NA,GND)
Input Voltage: +5V
Current (Single strip): Max. 0.84A
Current (Dual Strip): Max. 1.68A
Wattage (Single strip): Max. 4.2W
Wattage (Dual Strip): Max. 8.4W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 28 LEDs (400mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 400 x 13 x 5.5mm (15.7 x 0.5 x 0.2in)
Scope of Delivery:
2 x 400mm (15.7in)...
Specifications: Wireless IR remote control Power - Ture On/Shut Down Speed - effect speed Accelerate/Decelerate Brightness - Increase/reduce brightness Mode Selection - click for small mode selection / 2 second long press for large mode selection Automatic Cycle Mode - Autoplay all RGB effect, 10 senconds each mode Single Color Selection - White / Red / Green / Blue single color set up 3 bottons manual control Mode switch button -switch between 6 lighting effects Speed switch button - 6 speed range cycle switching Color switch button - adjust your LED lights color and brightness levels
Specifications: Strip Length:19in per strip
Input Voltage:DC 5V Only support DC5V ,don't support DC12V
Waterproof Grade:IP30
Double-sided adhesive
Powered by 5V 3-pin RGB header on your computer motherboard
Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
Memory Standard: DDR5 7200(OC)/7000(OC)/6800(OC)/6600(OC)/ 6400(OC)/ 6200(OC)/ 6000(OC)/ 5800(OC)/ 5600/ 5400/ 5200/ 5000/ 4800 Non-ECC, Un-buffered Memory*
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
OptiMem II
* Supported memory types, data rate (speed), and number of DRAM modules vary depending on the CPU and memory configuration, for more information please refer to CPU/Memory Support under the Support tab or visit https://www.asus.com/support/
* Non-ECC, un-buffered DDR5 memory supports On-Die ECC function.
Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm
Power Input:
Logic: 2.97V to 3.63V, 4.5V to 5.5V
Fan: 11.4V to 12.6V
RGB LED: 4.5V to 5.5V
Cable:
USB: 440mm
SATA Power: 465mm
Thermal sensor: 610mm
Fan extension: 300mm
RGB LED channels: Two 2-pin connector
Max. RGB LED strip per channel: 4
Max. RGB fan per channel:6 through 1 RGB LED hub