Specifications: Drive Connectors: 4 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors: 1 - USB Type-B (9 pin) USB 3.0 Female
Other Interface(s) : 1 - DB 9-pin Serial Male
Specifications: Drive Installation: Fixed
Drive Type: mSATA (Mini SATA)
Interface : SATA
Number of Drives: 1
Drive Connectors: 1 - mSATA (52 pin; Mini SATA) Receptacle
Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Maximum Data: Transfer Rate 6 Gbps
Type and Rate: SATA III (6 Gbps)
Specifications: • A pair of 3.6 inches mounting strips with screws.
• This mounting bracket kit let your 3.5" drives completely fit into a 5.25" drive bay.
• Maximize the internal space of your computer case for efficient usage.
• Eight screws included for mounting the bracket into the PC case.
• Die cast 1.00 mm metal strips with anti-rust treatment.
• Universal mounting screw holes for variety computer cases, rack mounted PC
Specifications: Color: Black
Plug & Play
Support Hot-Swap, RAID 0 / 1 / 5 / 10
All Aluminum Design with Conductive Dissipation Grooves
Power Control w/Molex 4pins or SATA 15pins connector, Sensor & Alarm
The Safety Tri-angle Lock Safeguards the Hard Drives
Super Air Ventilation & Heat Sink with 80mm Fan
Balance Handle - No Skew In/Out
Capacity Up To 1TG (1HD), 4TG (4HD)
Data Transfer Rate up to 3G(SATA) / 6G (SAS)
7D SATA Data Cable Included
RoHS ready
Specifications: Drive Connectors: 1 x SATA Data & Power Combo (7+15 pin)
Host Connectors: 1 x SATA Data & Power Combo (7+15 pin)
Dimensions: 1.40" x 4.00" x 5.70"
Weight: 9.20 oz.
Specifications: Supports any computer cases with an available 3.5" drive bay (both screw-on type or tool-less type)
Converts an available 3.5" HDD bay drive to accommodate two 2.5" HDD or SSD (Solid State Drive)
Constructed from robust SECC steel to ensure maximum structural integrity.
Specifications: Convert any 2 2.5" Hardrive into a 3.5" drive bay
Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!!
Quick and easy installation
For use in 3.5" internal drive bay
Screw pack included to mount the drives
Specifications: Drive Connectors: 1 - 29 pin SAS SFF-8482 Female Female
Host Connectors: 1 - 22 pin SATA DATA and Power Combo Male Male
1.70" x 7.10" x 5.70"
14.10 oz.
Specifications: Color: Black
Drive Connectors: 1 - SFF-8482 (29 pin; Data & Power; Internal SAS) Receptacle
Drive Installation: Removable
Drive Size: 2.5in
Drive Type: SAS & SATA
Enclosure Type: Plastic
Fan(s): No
Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Plug
Key Lock: No
Max Drive Height: 0.59 in [15 mm]
Number of 2.5 inch bays: 1
Number of Drives: 1
Specifications: Boost your original system HDD read speed without reinstalling OS
Minimum SSD data write times help extend SSD life-cycle
Easy to install
Compatible with most of 2.5” SATA SSD
Specifications: Drive Connectors: 1 - M.2 (NGFF) Receptacle
Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Maximum Data Transfer Rate: 6 Gbps
Type and Rate: SATA III (6 Gbps)