Saramonic SmartRig+ Di 2-Channel XLR & 3.5mm Microphone Mixer + 6.3mm Guitar Audio Interface with Phantom Power & MFi Certified Lightning Connector for iPhone, iPad, iPod, iOS Smartphones and Tablets

The Saramonic SmartRig+ Di is a portable microphone/guitar interface for recording professional quality audio.

The SmartRig+ Di makes your recording work easier by connecting professional microphones and guitars (or other instruments) to your smartphone, tablet, DSLR camera or video camera. 2 independent channels allow you to connect and control gain on multiple microphones or guitars at the same time. The interface also features 3 types of input to accommodate any set up: two XLR mic inputs, two 1/4" (6.35mm) guitar inputs, and two 1/8" (3.5mm) jack inputs for connecting any instrument or microphone. Features a MFi Certified Lightning Output Connector allowing you to attach an XLR microphone or 6.3mm guitar directly to your lighting connected iOS device

Provides 48V phantom power for microphones, and includes a 3.5mm headphone output for real-time sound monitoring. The two gain control thumbwheels make it easy to set precise levels. Toggle between Mono and Stereo output modes as necessary. Powered by one 9V battery.

Features
? 2 Independent Channels
? Two XLR Microphone Inputs
? Two 3.5mm (TRS) Microphone Inputs
? Two 1/4" Guitar Inputs
? Gain Control Knobs for Each Channel
? +48V Phantom Power Switch
? Mono/Stereo Output Switch
? MFi Certified Lightning Output Connector for iOS Devices
? 3.5mm Headphone Output Jack for Monitoring

Specifications:
Frequency Response: 20 Hz to 20 Khz, +/- 0.5 dB
Distortion: Less than 0.01% @ 1 kHz, -30 dBu input
Signal to Noise Ratio: 80 dB @ 1 kHz, -30 dBu input
Gain: +20 dB to Infinity
Power Requirement: One 9V Alkaline or Lithium
Dimensions: 4.7 x 1.6 x 1.6" (12 x 4 x 4cm)
Weight: 4.6 oz (130g)