DIY Cooling

• Block Compatibility: M.2 SSD
• Model #: Heatsink 22x70x3

Limited time offer, ends 07/19

• Type: M.2 Heatsink NVMe SSD PS5 Heat Sink
• Model #: BL-M2CL-PT

• Block Compatibility: M.2 2280 SSD
• Block Material: Aluminum
• Radiator Material: Aluminum
• Parts: 1 Year
• Model #: 2 x HS 70x22x3

Limited time offer, ends 07/13

• Model #: M.2-SSD Heatsink

Limited time offer, ends 07/31

• Model #: 11-001-024

• Type: Coolant
• Model #: MX1C1LTR

Limited time offer, ends 07/31

• Model #: 11-001-289

• Model #: SXD8025M12B 3pin

Limited time offer, ends 07/31

• Model #: 11-001-100

Limited time offer, ends 07/31

• Model #: 11-001-195

• Model #: BestAdapter-18

Limited time offer, ends 07/31

• Model #: 11-001-061

• Block Compatibility: M.2 2280 SSD
• Block Material: Aluminum
• Model #: KINGSHARE M.2 2280 Heat Dissipation

Limited time offer, ends 07/31

• Model #: 11-001-127

• Type: Heatsink
• Block Compatibility: 2280 M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x6mm
• Model #: HS22x70x6

• Model #: 1-Water-Cooling1453

(5)

Limited time offer, ends 07/19

• Parts: 1 Year
• Labor: 1 Year
• Model #: Heatsink880X

• Model #: 1-Com-Cooler3089

Limited time offer, ends 07/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Model #: 649823636302

• Model #: 5060681981161

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Model #: 5060681981086

• Model #: 5060681980805

• Model #: 6402411563770ASDFA6081687

• Model #: 649823635749

• Type: Coolant
• Model #: MX1UVG1LTR

• Model #: MYH-0244

• Type: CPU Block
• Model #: RGV-LAN-O11XL-P-K

Limited time offer, ends 07/31

• Model #: 11-001-362-6CM

Limited time offer, ends 07/31

• Model #: 11-001-360

• Type: Coolant
• Model #: MX1UVPU250

• Model #: 5060681981116

(1)

• Multi-channel Kit: Dual Channel Kit
• Brand: V-Color
• Series: XSky RGB
• Heat Spreader: Yes
• Model #: TMXSL00WWK

• Brand: CORSAIR
• Type: Custom Cooling Kit
• Block Compatibility: Intel 1851 | Intel 1700 | AMD AM5 | AMD AM4
• Radiator Size: 396mm x 120mm x 30mm
• Model #: CX-9070018-WW

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-D30_DWT