Video Resolution: This HDMI Displayport KVM switch 3 port supports Ultra HD resolutions up to 8K@60Hz, with backward compatibility for 4K@144Hz, 4K@120Hz, and 1080P@240Hz
Video Resolution: HDMI Dispalyport KVM 3 port switch supports resolution up to 8K@60Hz, 4K@144Hz.(HDMI port: support 8K@60Hz/4K@120Hz, DP port: support 8K@30Hz/4K@120Hz )Note:Please use HDMI2.1 and DP1.4 cables for a better experience, shoif the set distance allows,the length of cables more short more better.
Audio Chipset: Realtek Audio CODEC
High Definition Audio
2/4/5.1/7.1-channel
* You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
Support for S/PDIF Out
Specifications: 3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Molex 4 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 008S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining Note: Please set BIOS PCIe to GEN2 or GEN 1 if graphics card can not be identified or marked '!' warning sign
Specifications: 3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. SATA 15 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 007S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining Note: Please set BIOS PCIe to GEN2 or GEN 1 if graphics card can not be identified or marked '!' warning sign
Video Resolution: The dual monitor KVM switch supports resolution up to 8K@60Hz/[email protected] note: The DP part supports 8K@30Hz/4K@144Hz, and the HDMI part supports 8K@60Hz/4K@120Hz.
Video Resolution: HDMI 2.1 & DP 1.4 enabled 3 monitor KVM switches supports up to 8K@60Hz, 4K@144Hz & lower resolutions, delivering crystal-clear visuals with sharp, detailed imagery. Note: Actual resolution depends on your graphics card, monitors and cables.
Video Resolution: The resolution and fresh rate of triple monitor KVM switch supports up to 8K@60Hz/4K@144Hz, But please note that:?HDMI part supports 8K@60Hz,4K@120Hz,4K@60Hz,and backward compatible.?Displayport part support 8K@30Hz ,4K@144Hz and backward compatible.Warming: Please use HDMI2.1 and DP1.4 cables, if the set distance allows,the length of cabels more short more better.
Specifications: Maximum Resolution: 3840 x 2160
Host Interface: USB 3.0
DisplayPort: Yes
Number of DisplayPort Outputs: 1
System Requirements: Operating System(s):
Windows 8/8.1 (32/64bit)
Windows 7 (32/64bit)
Windows Vista (32/64)
Windows XP (32/64)
Windows 2000 (Aero 3D interface supported)