Specifications: with a total output of up to 880W, our USB-C charging block is equipped with 6 USB-C(4*140W+2*100W) and 4 USB-A(4*30W) power supply. It can charge up to 10 devices simultaneously
Specification: ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-20,000 Hz
OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D.
NOISE: 20 dB SPL
DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
Dimension: 6.38" (Long) x 2.05" (maximum body diameter)
Feature: eneloop 2550mAh typical /2450mAh Ni-MH minimum (AA)
Hold up to 85% of their charge after one year of non-use
Can be recharged up to 500 times
Pre-charged at the factory using power generated from solar energy and ready to use right out of the package
Work in extreme temperatures down to –4°F
No memory effect – batteries can be recharged when fully, or partially drained
Ni-MH, Low Self Discharge rechargeable batteries