Computer Accessories

• CPU Type: Other
• Model #: GB001480

• Model #: B07GSKS2K7

• Model #: PEGLB0FJQR3PDX

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 14mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14mm x 14mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Dim...
• Model #: 11-001-052

• Colors: Black
• Color: Black
• Model #: RAS-PCS14-BK

• Model #: 652843929125

Limited time offer, ends 06/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 06/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

Limited time offer, ends 06/30

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

Limited time offer, ends 06/30

• Model #: PI4BHEATSINKCU

• CPU Type: Other
• Model #: GB001478

• CPU Type: Other
• Model #: GB001481

Limited time offer, ends 07/09

• Model #: 7963453242

• Type: USB
• Model #: 889238755032ABC15

• Model #: 6402411567112ASDFA13164519

• Model #: 6402411563855ASDFA6221743

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
• Model #: 11-001-394

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 11mm x 11mm x 5mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Di...
• Model #: 11-001-049

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 10 x Heatsink
• Dim...
• Model #: 11-001-060

Limited time offer, ends 07/09

• Model #: 09685745653

• Model #: 6402411565620ASDFA9433027

• Model #: RPPICO

• Model #: RAS-PCS02PWR

Limited time offer, ends 06/28

• Model #: 9158154899245

Limited time offer, ends 06/28

• Model #: LEMCAFB09CL3MRKB

Limited time offer, ends 06/28

• Model #: 529384123575

Limited time offer, ends 06/28

• Model #: 538215440910

• Model #: 9046581013962

Limited time offer, ends 07/19

• Model #: 684013125891

• Model #: 694782940939

• Model #: SCW-114PC

• Model #: 133719606987

Limited time offer, ends 06/28

• Model #: 904465467272

Limited time offer, ends 06/28

• Model #: 9158154907735

Limited time offer, ends 06/28

• Model #: 965111457238

• Model #: 239245461363

• Model #: 684013144717

• Model #: 939459369980

Limited time offer, ends 06/29

• Model #: C472-L4838

Limited time offer, ends 06/27

• Type: Case Fan
• Model #: RB0927DKZ7H

• Model #: 07AH2035

• Model #: 07AH2036

• Type: USB
• Model #: 94411075898012

• Type: USB
• Model #: 94411074444025

• Type: USB
• Model #: 94411074981025

• Type: RF Semiconductors
• Model #: FF-GG-019

• Type: USB
• Model #: 9441107502125

• Model #: 9359014253904

• Model #: 9391048913850

• Model #: 27780-MRy5a0S8--bukf

• Model #: 939459361106

• Model #: 26052-fIWxqcxvp

• Model #: 694782948737

• Model #: 652843906829

• Model #: TB07FDYXPT7

• Model #: 7394-sYSYzgbT0-2v9lk

• Model #: 652843909868

• Model #: 694782970165

• Type: USB
• Model #: 94411073878425

• Color: Clear
• Model #: RAS-PCS16PWR

• Model #: 970740512517

• Colors: Black
• Color: Black
• Model #: RAS-PCS14PWR-BK

• Type: USB
• Model #: 94411075220925

• Model #: 9435761176243

• Type: USB
• Model #: 94411074776225

• Model #: VG-VZ62

• Model #: RAS-PCS01PWR-BK

• Model #: 545178815242

• Model #: 355756692604

• Model #: 965111456606

• Model #: 9555372231916

• Model #: 544838487195

• Model #: 592395261451

• Model #: 939459359127

• Model #: 9391048857147

• Model #: 477915965692

• Model #: 9435761173556

• Model #: 9359014267444

• Model #: 9430159892088

• Model #: 590538418236

• Model #: TB08Z1HG8N9

• Model #: 9391048893954

• Model #: 587132122270

• Model #: 9158154875478

Limited time offer, ends 06/28

• Model #: 9359014202186

• Model #: 884945149150

• Model #: 698617699207

• Model #: 9359014211263

• Model #: 592395257577

• Model #: 592395333660

Limited time offer, ends 06/28

• Model #: TB07Z1Y47C7

• Model #: 9391048876629

• Model #: 9433226557552

• Model #: 401917587668

• Model #: Pi 4 Model - 8GB

• Model #: 884945147330

• Model #: 919059856998