Operating Systems Supported: Windows 7/8/8.1/10 64-Bit, UEFI 2.3.1 or later
Specifications: Built in M.2 M-Key Recep5cal Connector
PCI Express Base Specifica5on Rev 3.0
NVM Express 1.2a
3.3v, 5A maximum output current
Short Circuit Protec5on
Thermal Shutdown Protec5on
Windows 7/8/8.1/10 64-Bit
Package Contents: 1 x Adapter
1 x Copper Nut
1 x M3x3 Screw, M3x5 Screw
2 x Washers
1 x SFF-8643 to U.2 Adapter Cable
Package Contents: 2S1P PCI Serial Parallel Combo Card with 16C550 UART
1 x Full-Profile Bracket
2 x Low-Profile Brackets (for Serial Ports)
1 x Low-Profile Bracket (for Parallel Port)
1 x Quick-Start Guide
External Ports: Extended to 4 x M.2 Internal Connectors (Socket 3, M Key, Type 2242/2260/2280/22110 PCIe x4 SSD Support)
Support for RAID 0, RAID 1, and RAID 10*
* Supported RAID levels vary by platform.
Internal Ports: PCI Express x16, Compatible with PCI Express x16 and x8 Slots
(If the adpater card is installed in a x8 slot, only the M2_1 and M2_2 connectors can be used.)
Specifications: Main chip: NEC UPD720202 chipset
Have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times;
Backward compatible with USB2.0, USB1.1, USB1.0
Transfer rate: 5Gbps/ 480Mbps/ 12Mbps / 1.5Mbps
SATA to take power by the board, or you can into a small Molex 4PIN power. (To change, please contact customer service)
Built-in 19-pin can turn out two USB3.0 ports
Compliance with PCI-Express Specification Revision 2.0
Compliance with xHCI specification version 1.0
Compliance with USB3.0 SuperSpeed specification version 1.0
USB support hot swap function
Support Windows XP / 2003 / Vista / win7 / win8 / 2003 / linux, can provide LINUX drivers.
Note:
Mini PCI-E because without a 5V power supply, not directly to the USB-powered, so it can be inserted using the SATA power cabl...