Specifications: Screw 6-32 x .25": Used in PC case cover and I/O plates
Screw 6-32 x .15": Used to install hard drives
Screw M3 x .25": Used to install floppy drive, CD-ROM drive and motherboard
Screw 4-40 x .18": Used in I/O plate connector
Metal Jackscrew Standoffs 6-32 to M3: Used in motherboard installation and pre-taped PC chassis
Metal Jackscrew Standoffs 4-40: Used in I/O plate connector
Case fan screw: Used to install plastic-framed cooling fans to PC chassis
Nuts 4-40 x 6 mm: Used in joining cables
Nuts 4-40 x 1.6 mm: Used in screw 4-40
AT-style PC Case Standoffs: Used to install motherboards to a PC chassis
Pre-Trapped PC Case Standoffs: Used to install motherboards to a pre-trapped PC chassis
ATX-style PC Case Standoffs: Used to install motherboards to a PC chassis
Case Dimension...
Specifications: Chassis Support: For Phanteks NV7 Chassis
Materials: ABS Plastic, PC Plastic
D-RGB Controller Output: 7A
Product Dimension: 150.9 x 80 x 16.4mm / 5.94 x 3.14 x 0.64in
Specifications: Dimensions(L x W x H):
GFX Holder kit: 249 x 148.1 x 141.8mm (close size) / 9.80 x 5.83 x 5.58"
305 x 178.1 x 141.8mm (open size) /12.00 x 7.01 x 5.58"
Riser cable: 165mm / 6.49"
Supported Graphics Cards: E-ATX, ATX , Micro ATX (may interfere with component installation on the rear panel. Max. CPU cooler height limited to 70mm.)
Supported GPU Type: Any length, up to3 slots wide
Riser Cable Model: Riser Cable PCIe 4.0 x16
Compatibility: PCIe 4.0 and older
Certifications: BKC210933AC
PCB / Wire UL Numbers: E1895721/E252840
Electronic Component Materials: PCBA, Tinned Copper Wire 30 AWG
Insulation Materials: PE, TPE
Other Materials: ABS, PP, SGCC Steel, Nickel, Gold, Brass
Connectors: PCIe x16 Male to PCIe x16 90° Female
Rated working voltage and current: DC 12V / 5A
Operating Temperature: -20° to ...
Specifications: Compatibility: Cases with Fractal Design Type-B HDD Mounts (Define 7 Series)
Package Contents:
2 x HDD trays
8 x 6-32 screws for HDD
8 x HDD dampers
8 x M3 screws for 2.5" SSD/HDD
2 x captive thumbscrew
Specifications: Compatibility:PCIe Gen 4 x16
Supported Graphic Cards:Any length, up to 3 slots wide
Required Slots:7 available PCIe slots for mounting
Dimension: 186.8mm x 144.7mm x 150.4mm
Package Content: 1 x Vertical GPU Mounting Kit
1 x Steel GPU Bracket & 175 mm PCIe Gen 4 Riser Cable
1 x Installation Accessories
Specifications: Convert any 2 2.5" Hardrive into a 3.5" drive bay
Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!!
Quick and easy installation
For use in 3.5" internal drive bay
Screw pack included to mount the drives
Specifications: Supports any computer cases with an available 3.5" drive bay (both screw-on type or tool-less type)
Converts an available 3.5" HDD bay drive to accommodate two 2.5" HDD or SSD (Solid State Drive)
Constructed from robust SECC steel to ensure maximum structural integrity.