Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency: 1000 Hz nominal
Alternating Frequency: 1000/1500 Hz nominal
Over Voltage Protection: 60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode: 8 dbm into 600 ohms
Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Pro3000 Analog Probe specifications
User interface:
ON/OFF pushbutton
Volume dial
Replaceable tip
3.5 mm earphone jack
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Operating Systems Supported: Windows NT 4.0, Windows 2000, Windows XP, Third Party X.25, Frame Relay and SNA solutions for UnixWare, OS/2, QNX, Linux and DOS available
Specifications: 4-port 256K UIB
PCI Card Slot: Universal 3.3V and 5V support
Line Speed: Aggregated performance up to 5 Mbps
Memory: Supports 4 DMA channels on 2-port boards; 8 DMA channels on 4-port boards
Protocol: Supports frame relay, X.25, PPP and SNA
Graphical Interface: Easy-to-use, Full tracking and monitoring
Routing: Supports IP/IPX
Circuits: Supports up to 256 virtual circuits (X.25)
Flow Control: BECN, LMI
Frame Relay: Supports up to 64 DLCIs per board
Transmission: Multiple CIR options
Compliance: Microsoft's NDIS and WAN Miniport driver
Data Flow: DTE/DCE support
Power Requirements:
+5VDC...