Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Features: Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX4090, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1 & Evolv Shift 2 Air)
Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. *Please do not use the screws to mount the TT P8 case (the GPU can still be secured by the two screws on the PCIE slots in the case)
Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wi...