Pro Audio & Musical Instruments

• Brand: Audio-Technica
• Color: Silver
• Feature: Precision-machined stainless-steel stabilizer holds records firmly in place for reduced resonance and improved sound quality Two recessed inner rings on the underside of the stabilizer accommodate records that bulge slightly near the spindle hole Easy to grip with fingers Approx. 450 g (15.9 oz) Fits spindles up to 21 mm long Works with a wide variety of turntables, including most Audio-Technica step-up and premium models* Made in Japan *Check with your turntable's manufacturer to confirm that it can support the weight of the AT628a. The AT628a should not be used with the following Audio-Technica turntables: AT-LP3XBT, AT-LPW30, and all entry-level models, including the Sound Burger and turntables in the AT-LP60, AT-LP60X and AT-LP70X Series. Please reach out to our Audio Solutions T...
• Model #: AT628A

• Model #: ATV-SG1

$19 promotional gift card w/ purchase, limited offer

• Brand: Audio Technica
• Series: Sound Burger
• Type: Turntables
• Spec: Belt Drive, VM Cartridge, USB-C Input Jack, Bluetooth, RCA Cable Included
• Model #: AT-SB727-YL

• Model #: AT-VM95E/H

• Type: Microphone
• Accessory Type: Other
• Weight: 2.2500
• Model #: AT2040USB

• Part Number: ATN95E
• Type: Turntable
• Color: Green
• Weight: lbs
• Model #: ATN95E

• Brand: Audio-Technica
• Color: Orange
• Accessory Type: Cartridges & Needles
• Specification: Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Cartridge (sold separately): AT-VM530xEN
• Model #: AT-VMN30XEN

• Brand: Audio Technica
• Part Number: AT-LP3XBT-BK
• Type: Turntable
• Color: Black
• Model #: AT-LP3xBT-BK

• Model #: AT-HS1

• Brand: Audio-Technica
• Color: Orange/Black
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 25,000 Hz Channel Separation: 25 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Nude elliptical Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Model #: AT-VM530XEN

• Brand: Audio-Technica
• Color: Green
• Accessory Type: Cartridges & Needles
• Specification: 0.3 x 0.7 mil elliptical replacement stylus for these cartridges:
• Model #: AT-VMN95E

• Model #: ATN3600LC

• Part Number: ATN91
• Color: Black
• Weight: lbs
• Model #: ATN91

$31 promotional gift card w/ purchase, limited offer

• Brand: Audio-Technica
• Part Number: AT-LP70XBT-BZ
• Type: Turntable
• Color: Black/Bronze
• Model #: AT-LP70XBT-BZ

• Accessory Type: Other
• Specification: Channel Separation: 20 (dB at 1 kHz) Vertical Tracking Force: 2.0-4.0 g (3.0 g standard) Stylus Construction: Bonded round shank Recommended Load Impedance: 47,000 ohms Output: 5.5 mV (1 kHz, 5 cm/sec.) Channel Balance: 2.0 dB (1 kHz) Stylus Shape: 0.3 x 0.7 mil elliptical Cantilever: Carbon fiber-reinforced ABS Mount: Half-inch Replacement Stylus: ATN-XP5 Coil impedance: 6.7 k ohms (1 kHz) DC resistance: 990 ohms Recommended load capacitance: 100 to 200 pF Coil inductance: 1.0 H (1 kHz) Vertical tracking angle: 20 degree
• Frequency Response: 20-18,000 Hz
• Dimension: 0.68" x 0.67" x 1.20"
• Model #: ATXP5

• Brand: Audio-Technica
• Model: Not Available
• Type: Condenser Microphones
• Length: 10.000
• Model #: AT2020

• Type: Turntable
• Model #: AUDCATLP60XBW

• Model #: AT-VMN95EBK

• Model #: AG2WAUDPPRO702

• Model #: ATR1100X

$24 promotional gift card w/ purchase, limited offer

• Brand: Audio-Technica
• Part Number: AT-LP70X-BZ
• Type: Turntable
• Color: Black-Bronze
• Model #: AT-LP70X-BZ

• Model #: AG2WAUDPPRO351

• Model #: AUDPAT2020USBX

• Type: Cleaning Kits
• Color: Black
• Model #: AT6013A

• Type: Condenser Microphones
• Specification: ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D. NOISE: 20 dB SPL DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical OUTPUT CONNECTOR: Integral 3-pin XLRM-type
• Dimension: 6.38" (Long) x 2.05" (maximum body diameter)
• Weight: 0.76 lb.
• Model #: AT2020

• Brand: Audio-Technica
• Accessory Type: Cartridges & Needles
• Specification: Frequency Response: 20 to 20,000 Hz Channel Separation: 24 dB (1 kHz) Vertical Tracking Angle: 20° Tracking Force: 1.8 to 2.2 g (2.0 g standard) Stylus Construction: Elliptical bonded Recommended Load Impedance: 47 k ohms Coil Impedance: 3.2 k ohms (1 kHz) DC Resistance: 750 ohms Coil Inductance: 480 mH (1 kHz) Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.) Output Balance: 1.5 dB (1 kHz) Cantilever: Aluminum pipe Static Compliance: 23 x 10-6 cm/dyne Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
• Feature: AT-VM520xEB Dual Moving Magnet Cartridge - AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus - 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with accuracy for outstanding audio reproduction - Paratoroidal coils...
• Model #: AT-VM520XEB/H

• Model #: AG2WAUDPAT20351

• Brand: Audio-Technica
• Part Number: AT-SMC1
• Color: Wood
• Feature: Cork slipmat reduces vibrations and unwanted resonance, ensuring clearer audio playback Provides a stable platform for records, minimizing slippage during playback At 1.6 mm, the slipmat offers a good balance between flexibility and support With a diameter of 295 mm (11.6") and thickness of 1.6 mm, this slipmat will fit most standard turntables Doesn't attract dust or shed particles like some other cork or felt mats, keeping records and turntables cleaner over time
• Model #: AT-SMC1

• Accessory Type: Other
• Weight: 0.04
• Model #: ATN-XP5

• Model #: ATN95EX

• Model #: AT-XP3/H

• Model #: AT-HS6SV

• Model #: AT-VMN95ML

• Type: 1 qty
• Model #: 042005134304

• Model #: CHMICSCMAY2003

OUT OF STOCK

• Model #: AT2040_3