DIY Cooling

(36)

• Type: Radiator
• Radiator Size: 396mm x 120mm x 30mm
• Radiator Material: Copper / Brass
• Fan Size: 3 Fan Slots (120 mm)
• Model #: CX-9030003-WW

Special price, limed time offer~

• Type: Liquid Cooling System
• Features: Compatibility : ASUS TUF Gaming GT502 Case Hercules Pump Specification: Rated Voltage: 12V DC Operation Voltage: 8 ~ 20V Rated Current: 1.2 ± 10% A Power consumption: 15W Maximum flow: 11 ± 15% LPM Maximum pump lift: 5.5 ± 0.5m System Temperature: -25 ~ 80 °C Noise Level: 40dBA MTBF: 15,000 hours PWM: Yes
• Package Contents: Included : 1set of BPTA-WDPGT502 1set of Drain Hose Set 1set of Mounting Screws/Accessories
• Model #: BPTA-WDPGT502

Limited time offer, ends 01/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Model #: SU1225FD12H-RP

• Type: CPU Block
• Model #: 6932167222350

(36)

• Type: Radiator
• Radiator Size: 310mm x 140mm x 30mm
• Radiator Material: Copper / Brass
• Fan Size: 2 Fan Slots (140 mm)
• Model #: CX-9031002-WW

Limited time offer, ends 01/31

• Type: Fan splitter cable
• Length: 6 inches
• Connector Number: 3
• Model #: 121014

off w/ promo code PHAKF24, limited offer

• Brand: Phanteks
• Series: Glacier R220C
• Type: Combo Reservoir
• Specification: Pump Compatibility: DDC Installation Compatibility: 120/140 mm fan/radiator Seal O-Ring: DuPont VITON Reservoir - ID: 126.72 /W: 1.78 (AS049) Color: Transparent RGB LED type: Digital-RGB (addressable) LED Number: 5050, 18pcs LED Electricity Spec: 5V/ 0.7A/ 3.5W Capacity: 200ml Materials: Acrylic body, Acrylic backplate, Steel bracket Max Water Loop Temperature: 60 degree C Fill Port: 1 x G 1/4 No. of Inlet: 3 x G 1/4 No. of Outlet: 1 x G 1/4
• Model #: PH-R220C_02

• Type: Reservoir
• Model #: 1013034

• Type: CPU Block
• Model #: B-UL-D5-X-V4

• Type: CPU Block
• Model #: RGV-LAN-O11EVOXL-P

• Type: CPU Block
• Color: Black
• Model #: CC-L16RD90-X-BK

• Type: CPU Block
• Model #: B-UL-D5-X-V4-CT60-100

• Type: CPU Block
• Model #: GC-LAN-O11-D360

• Model #: 1-CaseFans0635

Limited time offer, ends 01/09

• Model #: C00F-112410

• Model #: 1-CaseFans0763

• Type: CPU Block
• Model #: FG-B140-TXS

Limited time offer, ends 01/29

• Model #: 1-Com-Cooler0997

• Type: CPU Block
• Model #: RGV-COS-5000D-P-KG

Limited time offer, ends 01/29

• Model #: 1-Com-Cooler1320

• Model #: 1-CaseFans0493

• Type: CPU Block
• Model #: CT-D5-180-X-V2

• Model #: 1-Com-Cooler0351

• Model #: C075.1266

Limited time offer, ends 01/15

• Model #: 1-Com-Cooler3089

• Type: CPU Block
• Model #: RGV-PHA-NV7-P-KG

• Type: CPU Block
• Model #: 6932167221742

• Model #: 1-Com-Cooler2673

• Type: CPU Block
• Model #: CR-RD480RC-TK100

• Type: CPU Block
• Model #: B-GPU-BT-BK-NE

• Model #: 27-Com-Cooler0622

• Type: CPU Block
• Model #: CR-RD120RC-TK100

Limited time offer, ends 01/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Type: CPU Block
• Model #: CR-RD240RC-TK100

• Type: CPU Block
• Model #: CR-RD360RC-TK100