Features: • IP30 rated industrial power supply with integrated DIN-rail mount
• Provides up to 120 Watts of power (48 V, 2.5 A)
• Built-in active PFC (PF > 0.93)
• Short circuit/overload/over voltage/over temperature protection
• High efficiency (91%) design
• UL 508 approved
• 100 % full load burn-in test
• Extreme -25 to 70 °C
Specifications: HARDWARE FEATURES
DDM: Yes
SFP-MSA: Yes
Hot Swappable: Yes
MEDIA CONVERTER & MODULE
Standards and Protocols: IEEE 802.3z, TCP/IP
Wave Length: TX 1550 nm, RX 1310 nm
Power Supply: 3.3 V
Safety & Emission: FCC, CE
Cabel: Single-Mode Fiber
Fiber Type: 9/125 µm Single-Mode
Max. Cable Length: 2 KM
Data Rate: 1.25 Gbps
Port Type: LC Simplex
Environment:
- Operating Temperature: 0-70 °C (32-158 °F)
- Storage Temperature: -40-85 °C ( -40-185 °F)
- Operating Humidity: 10-90% RH, Non-Condensing
- Storage Humidity: 5-90% RH, Non-Condensing
Features: Designed for on-site gigabit fiber communication
Up to 2 km transmission distance with 9/125 µm SMF (Single-Mode Fiber)
Bidirectional WDM communication on a single fiber
Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
Supports Digital Diagnostic Monitoring (DDM)
Hot-swappable module desi...
Specifications: Ethernet:
Ethernet Ports: 5
Ethernet Speed: 10/100 Fast Ethernet
PoE: PoE+ 802.3at Type 2
Power:
Power Input: 44V - 57V DC Redundant DC Dual Power Inputs, reverse polarity protected
PoE Power Budget: 90W @ 70?
General:
Operating Temperature Range: -40°C to +70°C / -40°F to +158°F
Storage Temperature: -40°C to +85°C / -40°F to +185°F
Form Factor: Embedded
Power Consumption: 4 Watts Max : 91mAmps@+44VDC/70mAmps@+57VDC
Features: Allows power and data to be combined on the same Ethernet cable
Ports 1-4 PoE+ capable
Fully compliant to IEEE 802.3af/at
PoE Power Budget: 90W @ 70°C
Redundant dual power inputs: +44V to +57V DC
Industrial operating temp range -40°C to +70°C / -40°F to +176°F
Specifications: Power consumption: 1.3 watts via POE
Forwarded PoE Power:
Up to 75 watts depending on standard
Maximum current 0.7 amps on data pairs
Maximum current 1.5 amps on spare pairs
PoE Standards:
IEEE 802.3af POE (15W) and IEEE 802.3at at POE Plus (2-event signature) (25-30W)
IEEE 802.3bt POE (to 75W)
Custom POE (incl. "always-on 48V" and "4-pair" POE)
Ethernet Interface:
Two independently auto-configuring 10/100 ports
(10Base-T / 100Base-TX, half / full duplex)
Patch or crossover cables supported
LEDs Status indicators:
Green LED - shows POE Power good
Yellow LED - shows Ethernet link / activity
Dimensions: 1.22" x 8.27" x 1.97"
Weight: 0.23 lb.
Mounting: 2/4 Bolt 7mm mounting holes. On 50/60mm centres
Operating temperature: -40 degree C to 70 degree C [-40 degree F to 158 degree F]
Relative humidity: Up to 85%, non-condensi...
Specifications: Performance Level: Category 6
Termination Style: TG Style
Body Material : ABS
Contact Material: Plated Phosphor Bronze
Module Type: Mini-Com
Wiring Scheme: T568A/T568B
Shield Type: Unshielded (UTP)
Sub Brand: Pan-Net
Maximum Operating Temperature (°C): 65
Maximum Operating Temperature (°F): 149
Minimum Operating Temperature (°C): -10
Minimum Operating Temperature (°F): 14
Maximum Storage Temperature (°C): 70
Maximum Storage Temperature (°F): 158
Minimum Storage Temperature (°C): -40
Minimum Storage Temperature (°F): -40
Resistance Properties: Heat-Resistant
Standards Met: Exceeds Channel Requirements of ANSI/TIA-568-C.2 Category 6A and ISO 11801 Class EA Standards for Supporting 10GBASE-T Transmission Over Twisted Pair Cabling Systems in a 4-Connector Configuration up to 100 meters at Swe...