Frequency Band: Dual Radio for simultaneous dual-band operation
5 GHz 802.11ac 3x3 MIMO for up to 1,300 Mbps wireless data rate, with Multi User MIMO support (Wi-Fi 5)
2.4 GHz 802.11n 2x2 MIMO for up to 300 Mbps wireless data rate (Wi-Fi 4)
Standards: IEEE 802.11ac, 802.11n
Antenna: Integrated downtilt omni-directional antennas with maximum individual antenna gain of 3.9dBi in 2.4GHz and 5.4dBi in 5GHz
LAN Ports: (1) uplink Gigabit Ethernet port, with POE-in support (802.3af)
Features: LOW DELAY: Low Latency for High-fidelity Stereo Sound, lag-free content streaming in transmitter mode. Low Latency supported Bluetooth headphones/speakers are required. MAKE IT TWO: Upgraded 2-in-1 Bluetooth V5.0 transmitter can be paired with two Bluetooth receivers (like headphones + speakers) simultaneously. Note: Low Latency does NOT support Dual Link mode. ALWAYS ON: TaoTronics Bluetooth 2-in-1 Adapter continuously streams even while charging. Built-in battery for up to 10 hours use - enjoy your favorite wireless content all the time. BLUETOOTH EVERYWHERE: In Transmitter mode, turn a non-Bluetooth TV, PC, CD player, iPod, MP3 / MP4 into Bluetooth transmitter. Receiver mode: Ideal for home or vehicle music streaming sound system. PURE SOUND: high definition codec for a richer and deeper sound experience. Listen to CD-like au...
Frequency Band: RF
Operating frequency* 57–71 Ghz
* Depends on regulatory region.
Channel bandwidth 2160, 1080 MHz
Polarization Vertically linear
Beamwidth Azimuth: 3 dB 1.6°
Elevation: 3 dB 1.6°
LEDs: Power Flashing white: bootup in progress
White: not connected to UISP application
Blue: connected to UISP application
Ethernet Flashing blue: Ethernet activity
GPS Blue: receiving at least (4) GPS satellite signals
60G Blue: active connection
Power Supply: Power method Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply 48V DC, 0.65A gigabit PoE adapter (Included)
Supported voltage range 44–54V DC
22–27V DC
Features: Adapter Features
Data Rate Supported: 100/50/25/10GbE per port
Bus Type/Bus Width: PCIe 4.0 x16
Note: full 200Gbps performance requires PCIe slot bifurcation enabled in the system BIOS
Hardware Certifications: BSMI, CE, CMIM, FCC, ICES, KCC, RCM, UKCA, cURus, and VCCI
BMSI RoHS and RoHS-compliant: Product is compliant with Taiwan Bureau of Standards, Metrology and Inspection (BMSI), and EU RoHS Directive 2 2011/65/EU (Directive 2011/65/EU) and its amendments (e.g. 2015/863/EU)
Controller: Intel® Ethernet Controller E810-CAM1 (two controllers per adapter)
Power Consumption
DAC's
100GbE (Typical Power) Max 21.8 W 29.6 W (Max Power)
Idle (no traffic) 19.2 W (Typical Power)
Optics
100GbE Max 25.3 W (Typical Power) 33.5 W (Max Power)
Idle (no traffic) 22.8 W (Typical Power)
QSFP28 Max Pow...
Features: Support for throughput up to 1250 Mbps makes this SFP ideal for use with high-speed applications such as 1000-Mbps Ethernet.
Reports basic link characteristics such as SFP type, length of fiber link, wavelength, and bit rate.
Extended diagnostics enable this SFP to also report information such as temperature, TX and RX power, voltage, and bias current.
Hot-pluggable interface enables you to change SFPs on the fly when your network requirements change.
Compatible with SFP slots on most network devices. For details, contact our FREE Tech Support.
NOTE: This SFP does not work with Cisco switches.
System Requirements: Windows 10/8.1/8/7/Vista/XP
Mac OS 10.6-10.14
Chrome OS
Linux OS
Features: Fastest USB 3.0 and Gigabit solution ensure high speed transfer rate
Plug and Play in Windows (XP/Vista/7/8/8.1), Mac OS X (10.9/10.10), Linux OS.
Note: Driver required for Mac OS X (10.5-10.8), Mac OS X 10.11 (and above) and Windows 10 (and above)
Foldable and Portable design ideally suits your Ultrabook