Specifications: Power consumption: 1.3 watts via POE
Forwarded PoE Power:
Up to 75 watts depending on standard
Maximum current 0.7 amps on data pairs
Maximum current 1.5 amps on spare pairs
PoE Standards:
IEEE 802.3af POE (15W) and IEEE 802.3at at POE Plus (2-event signature) (25-30W)
IEEE 802.3bt POE (to 75W)
Custom POE (incl. "always-on 48V" and "4-pair" POE)
Ethernet Interface:
Two independently auto-configuring 10/100 ports
(10Base-T / 100Base-TX, half / full duplex)
Patch or crossover cables supported
LEDs Status indicators:
Green LED - shows POE Power good
Yellow LED - shows Ethernet link / activity
Dimensions: 1.22" x 8.27" x 1.97"
Weight: 0.23 lb.
Mounting: 2/4 Bolt 7mm mounting holes. On 50/60mm centres
Operating temperature: -40 degree C to 70 degree C [-40 degree F to 158 degree F]
Relative humidity: Up to 85%, non-condensi...
Power Supply: Power Supply: 24V, 0.5A Gigabit PoE Adapter (Included)
Max. Power Consumption: 8.5W
Power Method: Passive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range: 20 to 26V DC
Power Supply: IEEE 802.3af Ethernet switch
Cisco Power Injector - SB-PWR-INJ2-xx
AC adapter - SB-PWR-12V / 1.5A power adapter in a box
POE power
Peak power: 9.5Watts
Specifications: Interfaces/Ports
Total Number of Ports:
1
Network (RJ-45):
Yes
Number of Network (RJ-45) Ports:
1
Media & Performance
Media Type Supported:
Optical Fiber
Twisted Pair
Fiber Mode Supported:
Single-mode
Multi-mode
Maximum Distance Supported:
40 km
I/O Expansions
Total Number of Expansion Slots:
1
Expansion Slot Type:
SFP+
Number of SFP+ Slots:
1
Network & Communication
Ethernet Technology:
10 Gigabit Ethernet
Network Technology:
10GBase-T
10GBase-SR
10GBase-LR
10GBase-ER
10GBase-LW
10GBase-EW
10GBase-R
10GBaDescription
Power Source:
AC Adapter
Plug/Connector Type:
Type M
Physical Characteristics
Height:
1.2"
Width:
3.1"
Depth:
4.8"
Weight (Approximate):
9.67 oz
Miscellaneous
Package Contents:
10Gb Ethernet Fiber Medi...
WiFi Generation: WiFi 6 (802.11ax) Dual Band WiFi (AX1800):
2.4 GHz: 574 Mbps, 40/20 MHz 1024/256- QAM
5 GHz: 1200 Mbps, 80/40/20 MHz 1024-QAM
Backwards compatible with 802.11a/b/g/n/ac WiFi
1024-QAM—25% data efficiency and faster speeds than a 256-QAM router
Security: Nighthawk® App—Easily set up your router, manage your network from anywhere, pause the Internet on any device, track your Internet data usage, and more
NETGEAR Armor™—Protect your family’s WiFi with an automatic shield of security for your connected devices
Standards-based WiFi Security WPA, WPA2, and WPA3 with 128-bit AES encryption
Guest network
Automatic firmware update delivers latest security patches to the router
VPN support—Secure access to your home network while away
Power Supply: Power method Passive PoE 2-pair (4, 5+; 7, 8 return)
Power supply 24V, 0.3A gigabit PoE adapter (Included)
Supported voltage range 20—27V DC
Max. power consumption 7.1W
Antenna: Integrated down tilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 5.3 dBi in 2.4 GHz, 6.0 dBi in 5 GHz (5.8 dBi in dual-5 GHz mode) and 6.0 dBi in 6 GHz (5.9 dBi in dual-6 GHz mode). Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The down tilt angle for maximum gain is roughly 30 to 40 degrees.
Wireless Data Rates: 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)
802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)
Interface: 1x Gigabit Ethernet uplink (10/100/1000BASE-T autosensing), PoE
3x Gigabit Ethernet local ports (10/100/1000BASE-T), including one PoE out port: PoE out provides 802.3af (Class 0) when access point is powered by 802.3at, or no output when powered by 802.3af
One passive pass-through port, RJ-45 (back to bottom)