Antenna: Integrated down tilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 5.3 dBi in 2.4 GHz, 6.0 dBi in 5 GHz (5.8 dBi in dual-5 GHz mode) and 6.0 dBi in 6 GHz (5.9 dBi in dual-6 GHz mode). Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The down tilt angle for maximum gain is roughly 30 to 40 degrees.
Wireless Data Rates: Max bandwidths and peak data rate per band: 20/40 (2.4 GHz), 20/40/80/160 (5 GHz), peak data rate 2.69 Gbps, maximum data rate 5.39 Gbps
Specifications: Device Supported: Power Supply
Application: X410 E-series 1U Universal 4-post Rack
Compatible with:
HP 1810-24G Switch
HP 1810-8G Switch
HP 2510-24 Switch
HP 2510-24G Switch
HP 2510-48 Switch
HP 2510-48G Switch
HP 2520-24G-PoE Switch
HP 2520-24-PoE Switch
HP 2520-8G-PoE Switch
HP 2520-8-PoE Switch
HP 2810-24G Switch
HP 2810-48G Switch
HP 2910-24G al Switch
HP 2910-24G-PoE+ al Switch
HP 2910-48G al Switch
HP 2910-48G-PoE+ al Switch
HP 3500-24 Switch
HP 3500-24G-PoE yl Switch
HP 3500-24G-PoE+ yl Switch
HP 3500-48 Switch
HP 3500-48G-PoE yl Switch
HP 3500-48G-PoE+ yl Switch
HP 3500-48-PoE Switch
HP 1810-48G Switch
HP 2620-24 Switch
HP 2620-24-PoE+ Switch
HP 2620-24-PPoE+ Switch
HP 2620-48 Switch
HP 2620-48-PoE+ Switch
HP 3800-24G-2SFP+ Switch
HP 3800-24G-2XG Switch
HP 3800-24G-PoE+-2SFP+ Switch
...
Specifications: Interfaces/Ports:
4 x RJ-45
1 x RJ-45
Data Transfer Rate: 230 Kbps Serial
Management:
Telnet
SNMP
Digi Port Authority-Remote
HTTP for easy browser configuration
Status Indicators: Link / Power
Input Voltage:
100 V AC to 240 V AC
9 V DC to 30 V DC
Input Current:
400 mA 12 V DC
500 mA 9 V DC to30 V DC
Specifications: Output Power: 650W
Form Factor: External
Input Voltage: 110V AC; 220V AC
Number of +12V Rails: 1
Output Voltage:
12V DC @ 17.25A
-54V DC @ 12A
Dimensions: 1.70" x 17.40" x 7.20"
Weight (Approximate): 8.38 lbs.
Package Content:
H3C RPS 800 Redundant Power Supply
Power Cord
Front and Rear Mounting Brackets
Specifications: Length: 9 ft
Connector: Power IEC 320 EN 60320 C13
Connector (Second End): Power IEC 320 EN 60320 C14
Rated Voltage: AC 100-250 V
Rated Current: 10 A