Wired & Wireless Accessories

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 1.04 lbs. Power Requirements: DC 12~48V, 5A max. Unit Output Voltage: DC 54V Power Consumption: 120 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 4 IEEE 802.3at Power over Ethernet Plus Package Contents: IPOE-171-95W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-95W

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 0.95 lb. Power Requirements: DC 48~56V, 2A max. Unit Output Voltage: DC 45~53V Power Consumption: 75 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Package Contents: IPOE-171-60W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-60W

• Model #: IFT-802T

• Model #: TI-SG704

• Type: Other
• Specifications: Video Channel: 1 channel bi-direction Signal Mode: NTSC / PAL / SECAM Video Connector: BNC Video Bandwidth: 60 MHz Video Input / Output Voltage: 1.0 Vpp / typical peak-to-peak value Video Input / Output Impedance: 75 ohm / unbalanced interface Supported Video Type: 1080p: AHD / TVI / CVI 480p: CVBS Video Digital Bit Width: 8/10 bit Differential Gain (DG): < 1.3% (typical value) Differential Phase (DP): < 1.3 degree (typical value) SNR Weighted: > 67 dB (typical value) Data Channel: 1 channel Physical Protocol: RS485 Operation Mode: Simplex Data Connector: 3-pin terminal block with screw clamps Data Rate: DC-115.2 Kbps Bit Error Rate (BER): < 10ns LED Indicators: Power Video Link (fiber optic) Power Requirement: 5V DC, 2A Power Consumption: 4.8 watts (maximum) Mechanical: Metal Installation: Wall-mountable, DIN-rail (with optional...
• Model #: VF-106G-KIT

• Type: PoE Extender
• Specifications: Power consumption: 1.3 watts via POE Forwarded PoE Power: Up to 75 watts depending on standard Maximum current 0.7 amps on data pairs Maximum current 1.5 amps on spare pairs PoE Standards: IEEE 802.3af POE (15W) and IEEE 802.3at at POE Plus (2-event signature) (25-30W) IEEE 802.3bt POE (to 75W) Custom POE (incl. "always-on 48V" and "4-pair" POE) Ethernet Interface: Two independently auto-configuring 10/100 ports (10Base-T / 100Base-TX, half / full duplex) Patch or crossover cables supported LEDs Status indicators: Green LED - shows POE Power good Yellow LED - shows Ethernet link / activity Dimensions: 1.22" x 8.27" x 1.97" Weight: 0.23 lb. Mounting: 2/4 Bolt 7mm mounting holes. On 50/60mm centres Operating temperature: -40 degree C to 70 degree C [-40 degree F to 158 degree F] Relative humidity: Up to 85%, non-condensi...
• Model #: VOR-ORM-XT

• Type: Kit
• Specifications: Video Channel: 4 channel bi-direction Video Connector: BNC Video Input / Output Impedance: 75 ohm / unbalanced interface Video Input / Output Voltage: 1.0 Vpp / Typical peak-peak value Video Bandwidth: 5 Hz to 6.5 MHz Video Digital Bit Width: 8/10 bit Differential Gain (DG): < 1.3% (Typical Value) Differential Phase (DP): < 1.3 degree (Typical Value) SNR Weighted: > 63 dB (Typical Value) Data Channel: 4 channels Physical Protocol: RS-485 Operation Mode: Simplex Data Connector: 4 Pin terminal block with screw clamps Data Rate: DC-150 Kbps Data Distance: RS-485: 0-20 Km BPS: 0-115.2 Kbps Bit Error Rate (BER): < 10-9 Optical Connector: FC Fiber Type: Single-mode, single fiber Distance: 20 km for single mode Optical Wavelength: VF-402-T:TX: 1310nm, RX: 1550nm VF-402-R:TX: 1550nm, RX: 1310nm Transmitter Couple Power: M...
• Model #: VF-402-KIT

• Type: PoE Splitter
• Color: Black
• Specifications: 1 - Connector Type(s): - RJ-45 (PoE+) - RJ-45 - Terminal Block (4 Wire) Operating Temperature: -40°C to 75°C Storage Temperature: -40°C to 85°C Humidity: 5 to 95% (non-condensing) Industry Standards - IEEE 802.3 10BASE-T - IEEE 802.3u 100BASE-TX - IEEE 802.3ab 1000BASE-T - IEEE 802.3at PoE+ - IEEE 802.3af PoE
• Model #: POESLT1G48V

• Type: PoE Extender
• Color: Black
• Specifications: 2 - Connector Type(s): RJ-45 (PoE+) Operating Temperature: -40°C to 75°C Storage Temperature: -40°C to 85°C Humidity: 5 to 95% (non-condensing) Industry Standards - IEEE 802.3 10BASE-T - IEEE 802.3u 100BASE-TX - IEEE 802.3ab 1000BASE-T - IEEE 802.3x - IEEE 802.3z 1000BASE-TX - IEEE 802.3af Power over Ethernet - IEEE 802.3at PoE Plus - IEEE 802.3bt Dimension: 1.30" x 3.20" x 4.10" Weight: 0.20 lb.
• Model #: POEEXT1G60W

• Model #: 508216

• Brand: TRENDnet
• Part Number: TI-BE200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Standard Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE++ out port 1 x Gigabit PoE+ out port LED indicators Wall mount IP67 housing Data transfer rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB Certifications CE FCC IEC 61000-4-2 IEC 61000-4-4 IEC 61000-4-5 IEC 60068-2-27 (Shock) IEC 60068-2-32 (Free Fall) IEC 60068-2-6 (Vibration)
• Model #: TI-BE200

• Brand: TRENDnet
• Part Number: TI-IG290
• Type: PoE Injector
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt IEEE 802.3bz Device Interface 2 x 2.5GBASE-T ports 2 x 2.5GBASE-T PoE++ ports 4-pin removable terminal block LED indicators DIN-Rail mount Wall mount Grounding point Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) 2.5 Gigabit: 5000Mbps (full duplex) Terminal Block Redundant power inputs, 4 pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG): 12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque: 5 lb. – In / 0.5Nm / 0.56 Nm Wire strip length: 7-8mm MTBF 716,685 hours Housing IP30 metal case DIN-rail mount Wall mount Grounding poi...
• Model #: TI-IG290

• Features: • Hardened IP30 rated Gigabit PoE++ Injector • PoE (15.4W), PoE+ (30W), or PoE++ (90W) power • Network a PoE device located up to 100m (328 ft.) away • Extreme -40 to 75 °C (-40 to 167 °F) operating temperature range • Redundant power inputs with overload current protection • Includes DIN-rail mount and wall mount • Power supply sold separately (model TI-S15052,
• Weight: 1.9800
• Model #: TIIG90

• Type: MoCA Adapters
• Model #: 605998714597

• Type: PoE Extender
• Model #: 508957

• Brand: TRENDnet
• Part Number: TI-E100
• Type: PoE Extender
• Color: Black
• Model #: TI-E100

• Type: PoE+ Injector
• Color: Black
• Specifications: 1 - Connector Type(s): Ethernet Gigabit RJ-45 (PoE+) Terminal Block (4 Wire) Operating Temperature: -40°C to 75°C Storage Temperature: -40°C to 85°C Humidity: 5 to 95% (non-condensing) Industry Standards - IEEE 802.3 10BASE-T - IEEE 802.3u 100BASE-TX - IEEE 802.3ab 1000BASE-T - IEEE 802.3at PoE Plus - IEEE 802.3af Power over Ethernet - IEEE 802.3bt
• Model #: POEINJ1G90W

• Type: PoE Injector
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit port 1 x PoE+ Gigabit port 4-pin removable terminal block LED indicators DIN-Rail mount Wall mount Grounding point Data Transfer: RateEthernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Input: 48 – 56 V DC Compatible power supply: TI-S12048 (sold separately) Consumption: Max. 72 Watts PoE budget: 60 Watts Pin 1,2 for power+ and pin 3,6 for power- (mode A) Pin 4,5 for power+ and pin 7,8 for power- (mode B)
• Model #: TI-IG60

• Type: Switches
• Features: • 8 x M12 (X-code) Gigabit PoE+ ports • 2 x M12 (X-code) Gigabit port with Bypass function • 1 x M12 (A-code) power port • PoE power budget: 200W @ 56V DC / 100W @ 24V DC • EN 50155 compliant for rolling stock and railway applications • Hardened IP40 rated metal housing • 20Gbps switching capacity • Operating temperature range of -40° –
• Model #: TI-XPG102

• Type: PoE Injector
• Color: Black
• Specifications: Standards - IEEE 802.3 - IEEE 802.3u - IEEE 802.3ab - IEEE 802.3af - IEEE 802.3at - IEEE 802.3bt Device Interface - 1 x Gigabit port - 1 x 4PPoE Gigabit port - 4-pin removable terminal block - LED indicators - DIN-Rail mount - Wall mount - Grounding point Power - Input: 52 - 56 V DC - Compatible power supply: TI-S12048 (sold separately) - Max. consumption (PoE): 72W Operating Temperature: - 40° - 75° C (-40° - 167° F) Operating Humidity: Max. 95 % non-condensing Dimensions (L x W x H): 104 x 82 x 32mm (4.10" x 3.20" x 1.20") Weight: 154g (5.4 oz.)
• Model #: TI-IG90

• Model #: 508919

• Model #: 9158154908671

• Brand: TRENDnet
• Type: Switches
• Features: • 1 x 2.5G PoE++ port (Data + PoE out) • 1 x 2.5G port (Data in) • 95W PoE power budget • Supports PoE (15.4W), PoE+ (30W), and PoE++ (95W) devices • Uses IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt industry PoE standards for greater device interoperability • Network a PoE device located up to 100m (328 ft.) away • Fanless design eliminates operating noise and lowers energy consumption • Extreme operating temperature range - 40° — 75° C (-40° — 167° F) • Redundant power inputs with overload current protection • Includes DIN-Rail mount and wall mount • Power supply sold separately (model: TI-S15052) • NDAA / TAA compliant (U.S. only)
• Model #: TI-IG219

• Model #: 197600939885

• Model #: 949681437606

• Type: Wireless LAN Controller
• Specifications: Capacity Managed APs: Up to 75 WLANs (BSSIDs): 256 Concurrent Stations: Up to 2,000 Application Hotspot: WISPr Guest Access: Supported Captive Portal: Supported Mesh: Supported Voice: 802.11e/WMM, U-APSD, Tunneling to AP Network Architecture IP: IPv4, IPv6, dual-stack VLANs: 802.1Q (1 per BSSID), dynamic VLAN Redundancy: 1+1 with auto-synchronization DHCP Server: Supported Management Configuration: Web user interface, CLI, FlexMaster, SNMP v1, v2, v3 AAA: RADIUS (primary and backup) AP Provisioning: L3 or L2 auto-discovery, Auto-software upgrade, Automatic channel and power optimization Client Provisioning: Zero-IT, Auto proxy configuration Wireless Packet Capture: Supported Security Standards: WPA, WPA2, 802.11i Encryption: TKIP, AES, Ruckus Dynamic Pre-Shared Key Authentication: 802.1x, MAC address User Databas...
• Model #: 901-1205-XX00

• Type: PoE Adapter
• Color: Black
• Specifications: Output Voltage: 15V DC @ 0.8A Rated Voltage: 100-240V AC @ 50/60 Hz Input Current: 0.3A @ 120VAC,0.2A @ 240VAC Inrush Current: <30A Peak @ 120V AC, <60A Peak @ 230V AC Efficiency: 75+% Output Ripple: 1% Max. Switching Frequency: 50 kHz Operating Temperature: 0 to 40 degree C (32 to 104 degree F) Storage Temperature: 30 to
• Features: Provides Earth Grounding and Surge Protection Helps Protect Against ESD Events Powers Ubiquiti PoE Devices
• Model #: POE-15-12W

OUT OF STOCK

• Type: PoE Adapter
• Color: Black
• Specifications: Dimensions: 3.43" x 1.73" x 1.14" Weight: 0.20 lb. Rated Voltage: 100-240VAC @ 50/60Hz Input Current: 0.3A @ 120VAC, 0.2A @ 240VAC Inrush Current: <30A Peak @ 120VAC, <60A Peak @ 230VAC Efficiency: 75+% Output Ripple: 1% Max. Switching Frequency: 50 kHz Line Regulation: <= 3% Load Regulation: <= 5% 2-Pair Powering: Pins 4, 5 (+) and Pins
• Features: Provides Earth Grounding and Surge Protection Helps Protect Against ESD Events Powers Ubiquiti PoE Devices
• Model #: POE-24-12W

OUT OF STOCK

• Type: PoE Adapter
• Specifications: Output Voltage: 24V DC @ 0.5A Input Voltage: 90-260V AC @ 47-63 Hz Input Current: 0.3A @ 120V AC, 0.2A @ 240V AC Efficiency: 75+% Output Ripple: 1% Max. Switching Frequency: 50 kHz 2-Pair Powering: Pins 4, 5 (+) and Pins 7, 8 (-) Operating Temperature: 0 ~ 40 degree Celsius (32 ~ 104 degree Fahrenheit) Storage Temperature: -30 ~ 70 degree Celsius (-22 ~ 158 degree Fahrenheit) Operating Humidity: 35 to 95% Non condensing Dimensions: 1.73" x 3.43" x 1.14" Weight: 0.22 lb.
• Model #: POE-24-12W-G

OUT OF STOCK

• Type: Other
• Specifications: Video Channel: 1 channel bi-direction Signal Mode: NTSC / PAL / SECAM Video Connector: BNC Video Bandwidth: 60 MHz Video Input / Output Voltage: 1.0 Vpp / typical peak-to-peak value Video Input / Output Impedance: 75 ohm / unbalanced interface Supported Video Type: 1080p: AHD / TVI / CVI 480p: CVBS Video Digital Bit Width: 8/10 bit Differential Gain (DG): < 1.3% (typical value) Differential Phase (DP): < 1.3 degree (typical value) SNR Weighted: > 67 dB (typical value) Data Channel: 1 channel Physical Protocol: RS485 Operation Mode: Simplex Data Connector: 3-pin terminal block with screw clamps Data Rate: DC-115.2 Kbps Bit Error Rate (BER): < 10ns LED Indicators: Power Video Link (fiber optic) Power Requirement: 5V DC, 2A Power Consumption: 4.8 watts (maximum) Mechanical: Metal Installation: Wall-mountable, DIN-rail (with optional...
• Model #: VF-101G-KIT