Specifications: PoE Standard: IEEE 802.3af (Power over Ethernet)
IEEE 802.3at (High Power over Ethernet)
PoE Power Supply Type: Mid-Span / Type B
PoE Power Output: 52V DC, 510 mA, Max. 26 watts
Power Pin Assignment: 4/5 (+), 7/8 (-)
Maximum Distance: 4 units, daisy-chain installation with 500m support
Data Rate: 10/100/1000 Mbps
Switch Architecture: Store-and-Forward
Maximum Frame Size: 1552 Bytes
Flow Control:
Back pressure for half-duplex
IEEE 802.3x pause frame for full-duplex
LED Indicators:
1 x PoE IN (Green)
1 x LAN Data (Green)
1 x PoE OUT (Green)
Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC
Power Consumption: 3.2 watts (system maximum)
Specifications: Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
IEEE 802.3bt
Device Interface
1 x Gigabit PoE++ in port
1 x Gigabit PoE+ out port
1 x Gigabit 24/48V DC passive PoE out port
LED indicators
Wall mount
IP67 housing
Data Transfer Rate
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Gigabit: 2000Mbps (full duplex)
Performance
RAM buffer: 1Mb
MAC Address Table: 2K entries
Jumbo Frame: 9KB
DIP Switch
Adjust 24/48V DC passive voltage (default 48V DC)
Specifications: Interfaces/Ports
Total Number of Ports:
1
Network (RJ-45):
Yes
Number of Network (RJ-45) Ports:
1
Media & Performance
Media Type Supported:
Optical Fiber
Twisted Pair
Fiber Mode Supported:
Single-mode
Multi-mode
Maximum Distance Supported:
40 km
I/O Expansions
Total Number of Expansion Slots:
1
Expansion Slot Type:
SFP+
Number of SFP+ Slots:
1
Network & Communication
Ethernet Technology:
10 Gigabit Ethernet
Network Technology:
10GBase-T
10GBase-SR
10GBase-LR
10GBase-ER
10GBase-LW
10GBase-EW
10GBase-R
10GBaDescription
Power Source:
AC Adapter
Plug/Connector Type:
Type M
Physical Characteristics
Height:
1.2"
Width:
3.1"
Depth:
4.8"
Weight (Approximate):
9.67 oz
Miscellaneous
Package Contents:
10Gb Ethernet Fiber Medi...
Specifications: Output Power: 650W
Form Factor: External
Input Voltage: 110V AC; 220V AC
Number of +12V Rails: 1
Output Voltage:
12V DC @ 17.25A
-54V DC @ 12A
Dimensions: 1.70" x 17.40" x 7.20"
Weight (Approximate): 8.38 lbs.
Package Content:
H3C RPS 800 Redundant Power Supply
Power Cord
Front and Rear Mounting Brackets