Ports: SW1 (TP1): Auto-Negotiation On/Off
SW2 (TP1): 10Mbps or 100Mbps with Auto-Negotiation Off
SW3 (TP1): Half or Full-duplex with Auto-Negotiation Off
SW4 (Fiber1): Half or Full-duplex
SW5: AutoCross On/Off
SW6 (xBFTF10xx-10x): Link Pass Through On/Off
SW7 (TP2): Auto-Negotiation On/Off
SW8 (TP2): 10Mbps or 100Mbps with Auto-Negotation Off
SW9 (TP2): Half or Full-duplex with Auto-Negotiation Off
SW10 (TP2): Monitor On/Off
Transfer Rate: 10/100 Mbps
LEDs: PWR (Power): On = connection to external power
FD (Fiber Duplex): On = Full-duplex; Off = Half-duplex
LACT (Fiber Link/Activity): On = Link; Blinking = Activity
Duplex/Link (Copper): On (Yellow) = Half-duplex Link;Blinking (Yellow) = Half-duplex Activity
On (Green)= Full-duplex Link;Blinking (Green)= Full-duplex Activity
Speed (Copper): Yellow= 10...
Compatible Brand: Cisco Nexus 5000 Series Switches
Cisco Nexus 7000 Series Switches
Network Media: Media Type Supported:
Optical Fiber
Fiber Mode Supported:
Single-mode
Ethernet Technology:
10 Gigabit Ethernet
Network Technology:
10GBase-LR
Maximum Data Transfer Rate:
10 Gbit/s
Standards: IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber-Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet.
IEEE 802.3at Power over Ethernet enhancements standard
Power Adapter: PoE Output:
IEEE 802.3af Power over Ethernet standard
IEEE 802.3at Power over Ethernet enhancements standard
Power Output: PoE 52V DC, max. 30 watts
PoE Power Supply Type: Mid-Span
Power Pin Assignment: 4/5 (+), 7/8 (-)
PoE Power Budget: 30 watts
Transfer Rate: 1,000 Mbps (IEEE 802.3 compatible)
10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only.
Ports: 1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured
LEDs: 3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Green: Power Fault
2 x LED for Per Copper Port:
Green: 1000 LNK / ACT
Orange:100 LNK / ACT
1 x LED for Per mini-GBIC interface (Port-1 and Port-2):
Green: LNK / ACT