Standards: IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning tree protocol IEEE 802.1w Rapid Spanning tree protocol IEEE 802.1s Multiple Spanning tree protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2
Primary Ports: 8 1000Base-SX/LX/BX SFP interfaces, from port 1 to port 8 Compatible with 100Base-FX SFP, 2 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports, 1 x RJ-45-to-RS-232 serial port (115200, 8, N, 1)
Features: • 4 x 2.5G PoE++ ports
• 1 x 10G RJ-45 port
• 1 x 10G SFP+ port
• 240W PoE power budget
• 60Gbps switching capacity
• Hardened IP50 rated metal switch
• Fast PoE minimizes wait time for powering up PoE devices
• Includes DIN-Rail and wall mounts
Features: • 4 x Gigabit PoE+ ports
• 1 x Gigabit port
• 120W PoE power budget
• 10Gbps switching capacity
• Supports jumbo frames up to 9KB
• Hardened IP40 rated metal housing
• Includes DIN-Rail bracket and magnetic wall mount kit
• Operating temperature range of -40° – 75° C (-40° – 167° F)
• Redundant power inputs with overload current protection
• Alarm relay triggered by power
Features: • 4 x Fast Ethernet PoE+ ports
• 1 x Fast Ethernet port
• Up to 90W PoE power budget
• 1Gbps switching capacity
• Hardened IP50 rated aluminum switch
• Extreme operating temperature range of -40° – 75°C (-40° – 167°F)
• Dual inputs provide redundant power with overload current protection
• Includes DIN-Rail mount and wall mount brackets
• Power supply sold separately (model: TI-S15052)
• NDAA
Primary Ports: 4 x M12 (X-code) Gigabit PoE+ ports
1 x M12 (X-code) Gigabit port
1 x M12 (A-code) power port
LED indicators
Wall mount
Din-Rail mount
Grounding point
Network Media: WAN Modes: NAT, Classical Routing or Bridge Mode (NAT Disabled)
NAT Loopback Enable/Disable
NAT Modes: NAT, PAT, One-to-One NAT
VLAN tag assignment on WAN interface
IPv4 WAN Modes: Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP
Wireless WAN Mode: NAT enable/disable, Dynamic IP (DHCP), Static IP, fast roaming signal threshold/channels
IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6),...