Specifications: Applications: 1. Make sure to move to High Sierra while still on your old drive, so that a newer firmware is installed that can handle NVMe. 2. Do a full backup to your TimeMachine. 3. Create a High Sierra Installer on a bootable USB stick. 4. Open the macbook and disconnect the battery while wsitching out the drive and make sure both adapter and new SSD sit snug. Finally reconnect the battery before closing the shell. 5. Insert the installer USB stick from step2, and press the option key while the machine starts. Once its up you can now go to the disk utils to format.
Package Contents: 1x M.2 NVMe SSD Adapter Card for Upgrade of Macbook 2013-2017.
PC Connectors: TRANSMITTER
Host connection:
Video Input: (1) HDMI female;
Serial Control Port: (1) DB9 female;
Link Port: (1) SFP Cage;
USB: (1) USB Type B female;
Audio: (1) Line in, (1) Line out;
Local Video Output: (1) HDMI female
Console Connectors: RECEIVER
Console connection:
Video Output: (1) HDMI female;
Serial Control Port: (1) DB9 male;
Link Port: (1) SFP Cage;
USB: (4) USB Type A female;
Audio: (1) Mic In, (1) Speaker Out
Video Resolution: Maximum Digital Resolutions: 1920 x 1080 @ 60 Hz
Supported Resolutions:
1024x768
1280x720 (High-definition 720p)
1920x1080 (High-definition 1080p)
Specifications: Audio: Yes
Chipset ID: STDP4320
Converter Type: MST Hub
Output Signal: HDMI
Ports: 2
Maximum Digital Resolutions: 3840x2160 @ 30 Hz
Supported Resolutions:
Note: MST shares 21.6 Gbps across all attached displays. Higher resolutions can restrict the available bandwidth with the remaining ports, please see our guideline below for determining an ideal resolution for your setup.
Average resolution bandwidth allocation
1920 x 1080 (High-definition 1080p) @60 Hz - 22%
1920 x 1200 @60hz - 30%
2560 x 1440 @60hz - 35%
2560 x 1600 @60hz - 38%
3840 x 2160 (Ultra HD 4K) @30 Hz - 38%
Note: Exceeding 100% will reduce functionality.
Wide Screen Supported: Yes
Connector A: 1 x USB-C (24 pin) DisplayPort Alt Mode Male Input
Specifications: Supports Standard Notebook 2.5" SATA and SATA II Hard drives.
Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port.
Hot-swappable, plug and play, no drivers needed.
Backwards-Compatible with USB 3.0, 2.0 or 1.1 & USB-C
Package Contents: 2in1 USB-C/USB 3.0 to SSD/2.5" SATA Adapter Cable X 1