Specifications: Interfaces
IR/Serial 6 x Programmable IR / Uni-directional RS-232 Port
6 x 2-Pole Terminal Block Connector
IR: TTL level (0 to 5 V)
Carrier Frequency: 10 - 455 KHz;
Serial: Uni-directional RS-232 ( + - 5 V)
Baud Rate: 300 to 115200 (default: 9600);
Data Bit: 8 (default) or 7;
Stop Bit: 1 (default) or 2;
Parity: None (default), Even or Odd
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power: Consumption 5VDC, 8W(adapter); 48V, 10.5W (PoE, PoE 802.3 AF/AT compatibility)...
Changer Type: Type-C to MiniDP Adapter:
Chipset: Cypress CYPD1120
Signal input: USB 3.1 Type-C male
Signal output: Active MiniDP female
Support DP version: V1.2
DP port resolution support: Up to 4096 x 2160 (4K x 2K) (DisplayPort Alt mode)
MiniDP to HDMI Adapter:
Chipset: Chrontel CH7525
Signal input: MiniDP Male
Signal output: HDMI female (HDMI V1.4)
HDMI port Resolution support: Up to 4096 x 2160 (4K x 2K) at 30Hz
HDMI to VGA Adapter:
Chipset: Chrontel CH7101B
Signal input: HDMI male
Signal output: VGA female
VGA port Resolution support: Up to 1920 x 1200 at 60Hz