Specifications: Converts Serial ATA to Parallel ATA
Supports ATA 100/133
Fit for 3.5/2.5 SATA HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector.
Chipset : JM20330
Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive")
Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter
Turn your SATA hard drive into IDE interface hard drive
Features the JMicro JM20330 chipset
Compliant with SATA specification and supports up to 2TB hard drives
Specifications: Converts Parallel ATA to Serial ATA
Supports ATA 100/133
Fit for 3.5" IDE HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector
Package Contents: 1 x bridge board
1 x Molex power cable
Specifications: NOTE: 1. The adapter need for external power adapter to work. 2. When connecting the riser need to turn off your computer. 3. IDE Hard disk / CD-ROM motherboard SATA adapter when the need to hard disk / CD-ROM set jumpers main dish.
Specifications: USB-C to DB9 adapter connects legacy serial devices, such as modems and digital cameras, to your computer or laptop’s USB-C port.
Provides full modem control and hardware/software flow control
Supports data transfer speeds up to 230 Kbps-double the speed of a PC serial port
Works with any USB-C cable up to 16 ft. long (detachable 3 ft. cable is included)
Plug-and-play operation allows you to set it up and begin using it immediately
Small enough to carry in a pocket or purse for fast file transfers anywhere
Specifications: Humidity: 0~65% RH
Operating Temperature: 0 to 60 degree C
Storage Temperature: -20 to 80 degree C
FIFO: 512 Bytes
Flow Control: None, Xon/Xoff, RTS/CTS, DTR/DSR
Max Baud Rate:921.6 Kbps
MTBF:30,000 Hours
OS Compatibility:
Windows 7, 8.1, 10
Windows Server 2008 R2, 2012 R2, 2016
Mac OS X 10.11 and 10.12
Linux 2.6.x to 4.4.x LTS Versions only
Specifications: Connector on First End:1 x Type A Male USB 3.0 USB
Connector on Second End:1 x 40-pin IDC Female IDE
1 x 7-pin Male Serial ATA 3.0 SATA
Package Contents: USB 3.0 to SATA / IDE Combo Adapter
USB 3.0 Cable - 2.5 ft.
4-Pin Molex Power Cable
External Power Supply (Input: 100-240V, 50/60Hz, 0.8A Output: 12V, 2A)
Owner's Manual
Backup Software CD
PC Connectors: TRANSMITTER
Host connection:
Video Input: (1) HDMI female;
Serial Control Port: (1) DB9 female;
Link Port: (1) SFP Cage;
USB: (1) USB Type B female;
Audio: (1) Line in, (1) Line out;
Local Video Output: (1) HDMI female
Console Connectors: RECEIVER
Console connection:
Video Output: (1) HDMI female;
Serial Control Port: (1) DB9 male;
Link Port: (1) SFP Cage;
USB: (4) USB Type A female;
Audio: (1) Mic In, (1) Speaker Out
Specifications: Jmicro JM20330 Chipset
Plug & Play and Hot-swapping capability
Automatic SATA 3.0/1.5 Gbps speed negotiation
Serial-ATA 1.0 specification compliant
ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150Mbps
Support ATA PIO and UDMA modes 0 to 4
Support 3.5" IDE hard drives and 5.25" optical drives
Ultra low power consumption
Master/Slave mode support
Support Windows 98SE/ME/2000/XP Operating System
Package Contents: SATA to ATA/ATAPI IDE Interface Adaptor
SATA Cable
Power Cable
Features: breakout board connector with case db9 9 pin;db9 9 pin transition terminal interface module;db9 terminal board block terminator vga;d-sub d sub breakout box adapter serial cable;terminal connector signal module with enclosure
Specifications: Standard ATA 33/66/100/133, SATA 1.0 Supported OS Any OS that supports ATA and SATA Input 7-pin female SATA data connector 4-pin power connector Output 40-pin IDE female connector to IDE device Power Consumption 78 mA Temperature -20ºC to 60ºC (-4ºF to 140ºF) Humidity 0~90%, Non-Condensing Certification FCC, CE
Features: breakout board connector with case db15 15 pin;db15 15 pin transition terminal interface module;db15 terminal board block terminator vga;d-sub d sub breakout box adapter serial cable;terminal connector signal module with enclosure
Features: breakout board connector with case db25 25 pin;db25 25 pin transition terminal interface module;db25 terminal board block terminator vga;d-sub d sub breakout box adapter serial cable;terminal connector signal module with enclosure
Specifications: Size: 4cm x 3.5cm x 2.1cm
Length:0.8meters(2.62 FT)
USB Power Supply :3.3V
Type: RJ45 splitter with shielded, suitable for Cat 5 / Cat 5e / Cat 6 / Cat 7
Ports: 1 female to 2 female adapter (8P8C)
Features: breakout board connector with case db9 9 pin;db9 9 pin transition terminal interface module;db9 terminal board block terminator vga;d-sub d sub breakout box adapter serial cable;terminal connector signal module with enclosure
Features: breakout board connector with case db9 9 pin;db9 9 pin transition terminal interface module;db9 terminal board block terminator vga;d-sub d sub breakout box adapter serial cable;terminal connector signal module with enclosure
Features: breakout board connector with case db15 15 pin;db15 15 pin transition terminal interface module;db15 terminal board block terminator vga;d-sub d sub breakout box adapter serial cable;terminal connector signal module with enclosure
Features: breakout board connector with case db9 9 pin;db9 9 pin transition terminal interface module;db9 terminal board block terminator vga;d-sub d sub breakout box adapter serial cable;terminal connector signal module with enclosure
Features: breakout board connector with case db25 25 pin;db25 25 pin transition terminal interface module;db25 terminal board block terminator vga;d-sub d sub breakout box adapter serial cable;terminal connector signal module with enclosure