Specifications: Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate) : SATA
Drive Size: 2.5in
Interface USB: 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: SATA 15 Pin male to Molex 4 pin female adaptor
Easy migration to SATA power
Convert an existing SATA power connector to molex power connector
Specifications: Computer Connections
Direct 2
Port Selection Remote control selector button
LEDs
Port Status White
Switches
Port Selection: Remote Console Selector Button x 1
Operating Temperature: 32 ~ 104F (0 ~ 40C)
Storage Temperature: -4 ~ 140F (-20 ~ 60C)
Humidity: 0~80%
Housing
Case: Plastic
Cable Length: 54" (137.16cm)
Cable Type : USB 3.0 Type B to A x 4
Power Consumption: DC 5V, 1.43W
Operating System Support: Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1, Mac OS X 10.3+, Chrome OS™, Linux-based systems
Specifications: USB-C to DB9 adapter connects legacy serial devices, such as modems and digital cameras, to your computer or laptop’s USB-C port.
Provides full modem control and hardware/software flow control
Supports data transfer speeds up to 230 Kbps-double the speed of a PC serial port
Works with any USB-C cable up to 16 ft. long (detachable 3 ft. cable is included)
Plug-and-play operation allows you to set it up and begin using it immediately
Small enough to carry in a pocket or purse for fast file transfers anywhere
Specifications: Supports Standard Notebook 2.5" SATA and SATA II Hard drives.
Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port.
Hot-swappable, plug and play, no drivers needed.
Backwards-Compatible with USB 3.0, 2.0 or 1.1 & USB-C
Package Contents: 2in1 USB-C/USB 3.0 to SSD/2.5" SATA Adapter Cable X 1
Specifications: Connect A: USB 3.0 Type A Male
Connect B: RJ-45 (Gigabit Ethernet Port)
Type: USB 3.0 to Ethernet Converter
System Requirements:
Macintosh OS X 10.4 or above
Windows XP, Vista, 7 or above
Specifications: Interface: USB 3.0
Support Devices: IDE & SATA I/II/III, SSDs, Hard Drives, CD/DVD/Blu-ray Drives
Drive Size: 2.5" & 3.5" & 5.25"
LED Indicators: 1 x IDE; 1 x SATA; 1 x USB; 1 x Power
System Requirements:
Microsoft Windows XP, Vista, 7, 8.1, 10 (32 or 64 bit)
Mac OS X v10.6 and Up
Linux OS
USB 3.0 or 2.0 Equipped System
For USB 3.0 Speeds, the System Must Support USB 3.0 Specification