Specifications: Supported Devices: SATA Blu-ray/DVDRW/DVD ROM/CDRW/CD ROM, SSDs, Hard Drives
HDD Capacity: Maximum capacity, Check www.vantecusa.com for latest update on capacity
Drive Size: 5.25”, 3.5", and 2.5"
Power Supply: 12V, 2A AC Adapter
Specifications: Interface: USB 3.0
Support Devices: IDE & SATA I/II/III, SSDs, Hard Drives, CD/DVD/Blu-ray Drives
Drive Size: 2.5" & 3.5" & 5.25"
HDD Capacity: Up to 8TB
Power Supply: Ac Adapter
Material: Plastic
Dimensions: 63.00 x 42.00 x 14.00 mm
USB cable Length: 457.00 mm
System Requirements:
Microsoft Windows XP, Vista, 7, 8.1, 10 (32 or 64 bit)
Mac OS X v10.6 and Up
Linux OS
USB 3.0 or 2.0 Equipped System
For USB 3.0 Speeds, the System Must Support USB 3.0 Specification
Specifications: Adapter:
Device Support: SATA III/II/I SSD/HDD
Device Size: 2.5" SSD/HDD
SATA Interface: Standard SATA
USB Interface: USB 3.0 Type A (Backwards Compatible with USB 2.0)
HDD Capacity: Up to 2TB (Check www.vantecusa.com for any updates)
Material: Plastic
Power: USB Bus Powered
Casing:
Device Support: SATA III/II/I SSD/HDD
Device Size: 2.5", Thickness: 9.5mm
Material: Plastic
System Requirements:
Microsoft Windows XP, Vista, 7, 8.1, 10
Mac OS X v10.4 and Up
USB 3.0 or 2.0 Equipped System
For USB 3.0 Speeds, the System Must Support USB 3.0 Specification
For UASP, the OS must have Support for UASP Protocol
Specifications: Material: Aluminum
Input: USB
Output: 3.5 mm Stereo Headset and Microphone Jack
Compatible with Window XP, Vista, 7, 8, 8.1, Linux, Mac OS X, Chromebook, and many Android systems
Specifications: Interfaces
IR/Serial 6 x Programmable IR / Uni-directional RS-232 Port
6 x 2-Pole Terminal Block Connector
IR: TTL level (0 to 5 V)
Carrier Frequency: 10 - 455 KHz;
Serial: Uni-directional RS-232 ( + - 5 V)
Baud Rate: 300 to 115200 (default: 9600);
Data Bit: 8 (default) or 7;
Stop Bit: 1 (default) or 2;
Parity: None (default), Even or Odd
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power: Consumption 5VDC, 8W(adapter); 48V, 10.5W (PoE, PoE 802.3 AF/AT compatibility)...