Specifications: Converts Serial ATA to Parallel ATA
Supports ATA 100/133
Fit for 3.5/2.5 SATA HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector.
Chipset : JM20330
Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive")
Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter
Turn your SATA hard drive into IDE interface hard drive
Features the JMicro JM20330 chipset
Compliant with SATA specification and supports up to 2TB hard drives
Specifications: Converts Parallel ATA to Serial ATA
Supports ATA 100/133
Fit for 3.5" IDE HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector
Package Contents: 1 x bridge board
1 x Molex power cable
Specifications: Supports Standard Notebook 2.5" SATA and SATA II Hard drives.
Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port.
Hot-swappable, plug and play, no drivers needed.
Backwards-Compatible with USB 3.0, 2.0 or 1.1 & USB-C
Package Contents: 2in1 USB-C/USB 3.0 to SSD/2.5" SATA Adapter Cable X 1
Specifications: Standard ATA 33/66/100/133, SATA 1.0 Supported OS Any OS that supports ATA and SATA Input 7-pin female SATA data connector 4-pin power connector Output 40-pin IDE female connector to IDE device Power Consumption 78 mA Temperature -20ºC to 60ºC (-4ºF to 140ºF) Humidity 0~90%, Non-Condensing Certification FCC, CE
Specifications: Supports Standard Notebook 2.5" SATA and SATA II Hard drives.
Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port.
Hot-swappable, plug and play, no drivers needed.
Backwards-Compatible with USB 3.0, 2.0 or 1.1 & USB-C
Package Contents: 2in1 USB-C/USB 3.0 to SSD/2.5" SATA Adapter Cable X 1
Specifications: Jmicro JM20330 Chipset
Plug & Play and Hot-swapping capability
Automatic SATA 3.0/1.5 Gbps speed negotiation
Serial-ATA 1.0 specification compliant
ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150Mbps
Support ATA PIO and UDMA modes 0 to 4
Support 3.5" IDE hard drives and 5.25" optical drives
Ultra low power consumption
Master/Slave mode support
Support Windows 98SE/ME/2000/XP Operating System
Package Contents: SATA to ATA/ATAPI IDE Interface Adaptor
SATA Cable
Power Cable
Specifications: Supports Standard Notebook 2.5" SATA and SATA II Hard drives.
Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port.
Hot-swappable, plug and play, no drivers needed.
Backwards-Compatible with USB 3.0, 2.0 or 1.1 & USB-C
Package Contents: 2in1 USB-C/USB 3.0 to SSD/2.5" SATA Adapter Cable X 1
Specifications: • Standard 2.5" IDE storage device form factor (100.2mm x 69.9mm x 9.8mm)
• LED indicators: Power On, Master and Slave Card Detect, and Disk Activity
• Can be a primary bootable device containing the OS and applications (depends on CF card specifications)
• Transparent to operating system and does not require any drivers
• Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems
• Power supply via IDE interface (44-pin SFF IDE connector, +5V)
IDE Interface
• 44-pin SFF (Small Form Factor) IDE connector
• Supports Ultra-DMA IDE Interface
• Does not support hot swap on the IDE interface
CF Interface
• 2 CF card slots (Master/Slave) supporting CF Type I form factor
• Supports PIO mode, DMA and Ultra-DMA mode with data transfer rate u...