Extenders & Repeaters

• Type: HDMI & USB over Ethernet
• Max Extend Distance: 131 feet
• Color: Black
• Specifications: VE803T Connectors HDMI In: 1 x HDMI Type A Female (Black) USB: 1 x USB Type B Female (White) HDMI/USB Port: 2 x RJ-45 Female (Silver) Power: 1 x DC Jack Switches: EDID Selection: 1 x slide switch LEDs Power: 1 (Green) Video: 1080p @ 60Hz, at 40m 1080i @ 60Hz, at 60m Power Consumption: DC5V, 1W PhysicalProperties Housing: Metal VE803R Connectors HDMI Out: 1 x HDMI Type A Female (Black) USB: 1 x USB Type A Female(White) HDMI/USB Port: 2 x RJ-45 Female (Silver) Power: 1 x DC Jack Switches EQ Compensation: 1 x 8 position switch LEDs Power: 1 (Green) HDMI: 1 (Green) USB: 1 (Green) Video: 1080p @ 60Hz, at 40m 1080i @ 60Hz, at 60m Power Consumption: DC5V, 3.9W PhysicalProperties Housing: Metal
• Model #: VE803

• Color: Black
• Specifications: Interfaces IR/Serial 6 x Programmable IR / Uni-directional RS-232 Port 6 x 2-Pole Terminal Block Connector IR: TTL level (0 to 5 V) Carrier Frequency: 10 - 455 KHz; Serial: Uni-directional RS-232 ( + - 5 V) Baud Rate: 300 to 115200 (default: 9600); Data Bit: 8 (default) or 7; Stop Bit: 1 (default) or 2; Parity: None (default), Even or Odd Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A (Firmware upgrade only) Power: Consumption 5VDC, 8W(adapter); 48V, 10.5W (PoE, PoE 802.3 AF/AT compatibility)...
• Model #: VK236

• Type: DVI/Audio Extender
• Max Extend Distance: 131 feet
• Color: Black
• Connector A: 1 x DVI-D Female (White) 1 x Mini Stereo Jack Female (Green)
• Model #: VE600A

• Color: Black
• Specifications: Interfaces Serial 4 x Programmable Bi-directional RS-232/422/485 Port (4 x DB9 Male Connector, configurable via pin assignments); Baud Rate: 300 to 115200 (default: 9600); Data Bit: 8 (default) or 7; Stop Bit: 1 (default) or 2; Parity: None (default), Even or Odd; Flow Control: None (default) RTS/CTS Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)
• Dimensions: 1.65" x 2.98" x 5.12"...
• Model #: VK224

OUT OF STOCK

• Color: Black
• Specifications: Interfaces Relay 8 normally open relays (8 x 2-pole terminal block) Contact Rating: Max 24 VDC, 2A Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A (Firmware upgrade only) Power Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility) Output 12 VDC, 300 mA
• Dimensions: 1.65" x 2.98" x 7.87"
• Weight: 1.43 lbs.
• Model #: VK248