Extenders & Repeaters

• Model #: lo-4031

• Model #: 147923849702

• Model #: 3242435B0CLM

• Model #: 404669079825

• Model #: B3EW.112012

• Model #: B3EW.111937

• Model #: GODSB0FCLCBTQ2

• Model #: LEMSB0D371S63Q

• Model #: 652843049632

• Model #: GODSB0CBMFC13K

• Model #: 9158154889611

• Model #: 356571553316

• Model #: 9359014213892

• Model #: SQJSBTA3420C4RE273

• Type: HDMI over IP Extender Receiver
• Max Extend Distance: 328 feet
• Changer Type: HDMI Switch/Extender
• Color: Black
• Model #: B162-100-POE

• Model #: R145239503388869

Limited time offer, ends 04/06

• Type: HDMI Extender
• Max Extend Distance: 394 feet
• Changer Type: HDMI Switch/Extender
• Color: Black
• Model #: J-4KHE120M-4

• Color: Black
• Specifications: Interfaces Relay 8 normally open relays (8 x 2-pole terminal block) Contact Rating: Max 24 VDC, 2A Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A (Firmware upgrade only) Power Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility) Output 12 VDC, 300 mA
• Dimensions: 1.65" x 2.98" x 7.87"
• Weight: 1.43 lbs.
• Model #: VK248

• Model #: Tp-link Re505X Range Extender

• Model #: 9435761216451

• Type: HDMI Extender
• Max Extend Distance: 200m
• Connector A: hdmi
• Connector B: hdmi
• Model #: K0569

• Format: Desktop
• Standards: IEEE802.3?IEEE802.3u?IEEE802.3x
• Uplink Speed: 10/100/1000 Mbps
• PoE Ports: 4 x PoE
• Model #: 3-port Gigabit switch

• Format: Desktop
• Standards: IEEE802.3?IEEE802.3u?IEEE802.3x
• PoE Ports: 4 x PoE
• Model #: 3-port 100 Mbit/s switch

• Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
• Primary Port Count: 4
• PoE: Yes
• PoE Ports: 4 x PoE
• Model #: 4-port 100 Mbit switch extender

• Model #: 884945150101

• Model #: 9359014190087

• Model #: 652843999227

• Model #: 9359014214073

• Part Number: C2G31011
• Type: HDMI & USB over Ethernet
• Connector A: (1) USB-B Female, (1) 3.5mm Female, (1) USB-C Female, (1) HDMI Female, (1) RJ-45 Female, (1) USB Micro-B Female
• Connector B: (2) 3.5mm Female, (4) USB-A Female, (1) HDMI Female, (1) RJ-45 Female, (1) DC Power Plug
• Model #: C2G31011

• Part Number: C2G31012
• Type: HDMI & VGA over Ethernet
• Connector A: (1) USB-B Female, (2) 3.5mm Female, (1) HDMI Female, (1) RJ-45 Female, (1) USB Micro-B Female, (1) VGA Female
• Connector B: (2) 3.5mm Female, (4) USB-A Female, (1) HDMI Female, (1) RJ-45 Female, (1) DC Power Plug
• Model #: C2G31012

• Type: DisplayPort over Ethernet
• Max Extend Distance: 230 feet
• Color: Black
• Connector A: 1 x DisplayPort 1.4 1 x HDMI 2.0 1 x RJ-45 2 x 3.5mm 1 x Micro-USB B
• Model #: B127A-1A1-BDBD

• Type: HDMI & USB over Ethernet
• Max Extend Distance: 131 feet
• Color: Black
• Specifications: VE803T Connectors HDMI In: 1 x HDMI Type A Female (Black) USB: 1 x USB Type B Female (White) HDMI/USB Port: 2 x RJ-45 Female (Silver) Power: 1 x DC Jack Switches: EDID Selection: 1 x slide switch LEDs Power: 1 (Green) Video: 1080p @ 60Hz, at 40m 1080i @ 60Hz, at 60m Power Consumption: DC5V, 1W PhysicalProperties Housing: Metal VE803R Connectors HDMI Out: 1 x HDMI Type A Female (Black) USB: 1 x USB Type A Female(White) HDMI/USB Port: 2 x RJ-45 Female (Silver) Power: 1 x DC Jack Switches EQ Compensation: 1 x 8 position switch LEDs Power: 1 (Green) HDMI: 1 (Green) USB: 1 (Green) Video: 1080p @ 60Hz, at 40m 1080i @ 60Hz, at 60m Power Consumption: DC5V, 3.9W PhysicalProperties Housing: Metal
• Model #: VE803

• Type: DisplayPort to HDMI over Ethernet
• Max Extend Distance: 230 feet
• Changer Type: DisplayPort to HDMI
• Color: Black
• Model #: B127A-1A1-BDBH

• Type: HDMI, USB, Serial, IR, Audio
• Max Extend Distance: CATx: 328 feet. (100 m); single-mode fiber (SFP): up to 30 km
• Color: Black
• Specifications: HDMI 4K video over IP This attractively priced IP video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI 4K video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load. Plug-and-play setup Because the transmitter and receiver install directly into your existing LAN infrastructure, integration is easy. And you don't have to configure any IP settings. Connect your source, your display, a network switch, and you're ready go. PoE support for remote powering The MediaCento IPX 4K is PoE powered eliminating the need for power supplies. Using a PoE netwo...
• Model #: VX-HDMI-4KIP-RX

• Color: Black
• Specifications: Interfaces Serial 4 x Programmable Bi-directional RS-232/422/485 Port (4 x DB9 Male Connector, configurable via pin assignments); Baud Rate: 300 to 115200 (default: 9600); Data Bit: 8 (default) or 7; Stop Bit: 1 (default) or 2; Parity: None (default), Even or Odd; Flow Control: None (default) RTS/CTS Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)
• Dimensions: 1.65" x 2.98" x 5.12"...
• Model #: VK224

• Color: Black
• Specifications: Interfaces IR/Serial 6 x Programmable IR / Uni-directional RS-232 Port 6 x 2-Pole Terminal Block Connector IR: TTL level (0 to 5 V) Carrier Frequency: 10 - 455 KHz; Serial: Uni-directional RS-232 ( + - 5 V) Baud Rate: 300 to 115200 (default: 9600); Data Bit: 8 (default) or 7; Stop Bit: 1 (default) or 2; Parity: None (default), Even or Odd Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A (Firmware upgrade only) Power: Consumption 5VDC, 8W(adapter); 48V, 10.5W (PoE, PoE 802.3 AF/AT compatibility)...
• Model #: VK236