Type: Wallmount Mini DIN Rail Fiber Enclosure - 1-Slot Adapter
Color: Black
Specifications: Non-locking door can be removed providing complete access to the enclosure.
DIN Rail mounting bracket is removable.
Enclosure can be mounted five ways.
There are three possible cable entry points for the fiber.
Enclosure includes internal cable management.
Specifications: Interfaces
Serial
4 x Programmable Bi-directional RS-232/422/485 Port
(4 x DB9 Male Connector, configurable via pin assignments);
Baud Rate: 300 to 115200 (default: 9600);
Data Bit: 8 (default) or 7;
Stop Bit: 1 (default) or 2;
Parity: None (default), Even or Odd;
Flow Control: None (default) RTS/CTS
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A
Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)
Connector A: Side A - Connector 1: 1 x HDMI (FEMALE)
Side A - Connector 2: 2 x RJ45 (FEMALE)
Connector B: Side B - Connector 1: 2 x RJ45 (FEMALE)
Side B - Connector 2: 2 x HDMI (MALE)
Package Contents: Transmitter unit
2 x Receiver units
2 x USB Micro-B cables, 1 ft.
External power supply w/NEMA 1-15P plug and 5 ft. cord (Input: 100–240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
Mounting hardware
Owner’s manual