Extenders & Repeaters

• Model #: 7099892204217

• Model #: 9158154820454

• Brand: StarTech.com
• Model #: VDSL-LAN-EXTENDER-1G

• Model #: 166185687785

• Model #: 680952029030

• Color: N/A
• Model #: EW3F0000235-AX

• Model #: P28778-B21

• Color: Black
• Specifications: Interfaces Relay 8 normally open relays (8 x 2-pole terminal block) Contact Rating: Max 24 VDC, 2A Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A (Firmware upgrade only) Power Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility) Output 12 VDC, 300 mA
• Dimensions: 1.65" x 2.98" x 7.87"
• Weight: 1.43 lbs.
• Model #: VK248

• Type: HDMI, USB, Serial, IR, Audio
• Max Extend Distance: CATx: 328 feet. (100 m); single-mode fiber (SFP): up to 30 km
• Color: Black
• Specifications: HDMI 4K video over IP This attractively priced IP video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI 4K video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load. Plug-and-play setup Because the transmitter and receiver install directly into your existing LAN infrastructure, integration is easy. And you don't have to configure any IP settings. Connect your source, your display, a network switch, and you're ready go. PoE support for remote powering The MediaCento IPX 4K is PoE powered eliminating the need for power supplies. Using a PoE netwo...
• Model #: VX-HDMI-4KIP-RX

• Color: Black
• Specifications: Interfaces Serial 4 x Programmable Bi-directional RS-232/422/485 Port (4 x DB9 Male Connector, configurable via pin assignments); Baud Rate: 300 to 115200 (default: 9600); Data Bit: 8 (default) or 7; Stop Bit: 1 (default) or 2; Parity: None (default), Even or Odd; Flow Control: None (default) RTS/CTS Ethernet 1 x RJ-45 Female, 10/100Base-T Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 Switches Controller ID: 1 x 16-segment Switch Expander ID: 1 x 8-segment Switch Reset Button: 1 x Semi-recessed Pushbutton USB: 1 x USB Type A Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)
• Dimensions: 1.65" x 2.98" x 5.12"...
• Model #: VK224

• Model #: 9359014213892

• Model #: 356571553316

• Model #: 9359014212055

Limited time offer, ends 07/24

• Max Extend Distance: 198 feet
• Specifications: NEW 60M HDMI KVM Over Network Extender 4K 60Hz HDMI Transmitter by RJ45 CAT5e CAT6 Extensor Support KVM remote control Video Standards: HDMI 2.0; HDCP 2.2 and DVI compliant Maximum pixel clock: 300MHz Maximum data rate: 18Gbps Resolution: 3840 x 2160@60Hz Connector: HDMI-A Impedance: 100O ?
• Package Contents: HDMI KVM extender transmitter x1 HDMI KVM extender receiver x1 Power adapter x1 User manual x1
• Model #: J-OZD5-1D6-1-5