Specifications: Supports HDMI Standard Norm
Complaint with HDMI 1.4 specification
Analog RGB output for VGA with Triple 9-bit DAC up to 200MHz pixel rate.
Supports VESA and CEA timing standards up to WUXGA 1920x1200@60MHz and 1920x1080@60MHz.
On-chip encoder supports 2 channel IIS/S/PDIF audio output
Integrated EDID buffer
VGA/HDMI connection detection supported
Supports Auto Power Saving mode and low stand-by current
Supports Audio via Jack Stereo Cable
Plug and Play, Driverless Installation
Device is 10.3in Long (Cable is 6.5in)
Audio Cable is 18.4in Long
Specifications: Extracts Audio from an HDMI Signal and Sends It to a Separate Audio System
Recommended for connecting HDMI source to speakers that don’t have HDMI input
3.5 mm stereo and TOSLINK optical outputs connect to analog or digital non-HDMI audio equipment
LED indicates the unit is receiving power or transmitting an audio/video signal
Built-in 6 in. HDMI cable connects to audio/video source
Included 3 ft. USB Micro-B cable provides power to the unit
Versatile Audio Options
Supports 2-channel stereo and multi-channel audio up to 5.1 surround sound
Supports uncompressed, such as LPCM, and compressed audio, including DTS and Dolby Digital
Vibrant UHD Video
Transmits UHD video resolutions up to 3840 x 2160 (4K x 2K) @ 30 Hz
Supports 24-bit True Color (8 bits per channel) at 4K x 2K
Supports 36-bit Deep Color ...
Specifications: Resolution: 3840 x 2160 at 30Hz (Dual Display)
Resolution: 3840 x 2160 at 60Hz (Single Display)
Output: Requires 5V, 2A external power over Micro-B USB port
DisplayPort 1.2a compliant
Link Rate: HBR2/HBR/RBR
Bandwidth: 5.4Gbps max.
Support SST and MST (when both host and monitor support)
Support 7.1 sound channel; max. sampling size 192KHz
Rating: Temp 80°C, Voltage 30V
Conductor Resistance: At 20°C max 30AWG: 376.95 O/KM
Insulation Resistance: 10M -KM min at 20°C DC 500V (EIA-364-21)
Dielectric Strength: AC 500V/1 minute no breakdown (EIA-364-20)
Impedance: Pairs (differential mode) 100±50HMS
Attenuation (max.): 5.02dB@100~450MHz; 7.695dB@1GHz; 12.595dB@2GHz; 17.495dB@3GHz; 22.395dB@4GHz; 27.295dB@5GHz; 32.195dB@6GHz; 37.095dB@7GHz
Return...
Specifications: COMPATIBILITY:
Kindle/Kindle Touch
Kindle Fire
Kindle 3/3G
Samsung
Galaxy S II - Verizon
Galaxy S II - AT&T
Galaxy S3
Galaxy S Vibrant
Galaxy S II - T-Mobile
Galaxy S4
Galaxy Note
Galaxy Note II
Galaxy Note 8.0
Galaxy Note 10.1
Specifications: Active or Passive Adapter: Active
AV Input: HDMI
AV Output: Audio RCA, Composite
Industry Standards: Standard HDMI, DVI 1.0
Audio Specifications:
Input - LPCM 2Ch, 48kHz
Output - Stereo L/R
Supported Resolutions:
Input
TV - 1080p, 720p, 576p, 480p @ 60Hz
PC - 1920x1080, 1280x800, 1280x768, 1224x768, 800x600, 640x480 @ 60Hz
Output: 480i, 576p
Input Current: 0.4 A
Input Voltage: 100 ~ 240 AC
Output Current: 2000 mA
Output Voltage: 5 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: Operating: 0 to 40 C / 32 to 104 F
Storage: -40 to 70 C / -40 to 158 F
Cable Length (in.): 6
Color: White
Connector A: MINI DISPLAYPORT (MALE)
Connector B: HDMI (FEMALE)
Specifications: Performance Grade: Good
Resolution: Supports PC resolutions up to 1920x1200(WUXGA-R), 60Hz, 8bpc: 154MHz;1920x1080P, 60Hz, 10bpc: 144MHz
Versions Supported: DisplayPort 1.1 input and VGA output
Power requirements: Powered from DisplayPort source
Construction: The DP to VGA adapter uses an integrated chip to provide an active digital to analog conversion
Weight Lbs: 0.2
RoHS Compliant: Yes
Specifications: Quad-shielded cable with PVC jacket for maximum audio/video performance & prevention of signal loss
Display modes:
PC VGA, SVGA, XGA, SXGA, & UXGA display modes
HDTV: 480i, 576i, 480p, 576p, 1080i & 1080p
Supports multi-channel digital audio (system's DisplayPort must support audio)
AC to DC level trigger - requires dual-mode Display Port source
RoHS compliant