Your Browsing History
- Free 30-day Returns
- $5.99 Shipping ()
$113.99
Most customers receive within 5-9 days.
Meet Your Seller
Upgraded MMDVM Nano Hotspot - Portable NanoPi NEO with NanoHat OLED MMDVM with Built-in WiFi Module | Allwinner H3 RAM 512MB Ubuntu Ready | Supports C4FM YSF NXDN DSTAR P25 DMR | CNC Alloy Case
- [NEW MMDVM Nano Hotspot] Connecting Python Programmable NanoHat OLED to NanoPi NEO, the Nano Hotspot module is created to run Ubuntu and other useful systems controlled by PYTHON. The driver's source code and a user friendly shell interface are provided from which you can check system information and status, also a customized aluminum 3D case, inner fan, and heatsink are ready for the mudule
- Connect RJ45 cable to hotspot. NOTE: Be sure to use a qualified power supply 5V2A, non-conforming power will lead to bit error rate(BER) instability. Check whether the LED on the left side of the OLED is flashing (not green). If it is flashing, it indicates that the RF board is running. If it is not flashing, please power up again. Wait 1 minutes the same router computer open http://pi-star mac open http://pi-star.local login:pi-star pass:raspberry http://pi-star/admin/configure.php
- Radio/Modem Type: set Modem: STM32-DVM-(Pi Hat)GPIO then Save MMDVM Display Type: then select OLED th
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Specification:
Power require: 5V2A
MCU: F103C8T6
Transceiver IC: ADF7021, Programmable output power: -16dBm to +10dBm
TCXO: 14.7456MH z, ± 2.5 ppm
PCB: 40mmx40mmx 1.2 mm
Host: NanoPi NEO 512M RAM, v 1.4, A3 Architecture
Options USB WiFi: RTL8188CUS
Replaceable folding antenna, center frequency 433MHz.
External USB port for USB wifi ^^ rtlsdr stick ^^Usb to Serial connect Nextion 2. x-3. x tft screen
OLED: I2C 128*64px
SDCard: 32gb
Charging cable: Micro USB can transfer data, support 5V2A
DOCS: Manual&software
wiki. friendlyelec. com/wiki/index. php/NanoPi_NEO
wiki. friendlyelec. com/wiki/index. php/NanoHat_OLED
**Modem TYPE ""MMDVM_HS_NPi Hat (VR2VYE) for Nano Pi (GPIO) ""
update FW sudo pistar-vyehsflash nano_hs**
www. pistar. uk/beta/Pi-Star_NanoPi_V 4.1. 5_25-Jun-2021. zip
Package included:
1. NanoPi 512M RAM
2.
SDCard: 16-32G
3. 50cm data cable
4. NanoHat OLED
MMDVM nanopi pistar hotspot setup GUIDE:
connect RJ45 cable to hotspot, power up with 5V 2A Phone Charge
to ensure and check OLED left LED Flash (not green one) it Mean the RF board
Running if not, repower again
wait 1 minute the same router computer open http: //pi-star
mac open http: //pi-star. local
login: pi-star pass: raspberry
http: //pi-star/admin/configure. php
Radio/Modem Type: set Modem: STM32-DVM- (Pi Hat) GPIO then Save
MMDVM Display Type:
then select OLED then Save
reselect Modem: STM32-DVM- (Pi Hat) GPIO then save
you can see the OLED on
open http: //pi-star/admin/expert/edit_mmdvmhost. php
OLED Scroll set 1
Apply Changes
the base setting is ok, you can select your Digital Mode now
if every thing work well pls don't update the pi-star
FAQ:
Q: the OLED didn't Work?
A: Check the RF board the LED need flash 1s on/off, repower to let it work.
Q: the hotspot DMR didn't work?
A: go to admin live log download the log file to see what happen
Power require: 5V2A
MCU: F103C8T6
Transceiver IC: ADF7021, Programmable output power: -16dBm to +10dBm
TCXO: 14.7456MH z, ± 2.5 ppm
PCB: 40mmx40mmx 1.2 mm
Host: NanoPi NEO 512M RAM, v 1.4, A3 Architecture
Options USB WiFi: RTL8188CUS
Replaceable folding antenna, center frequency 433MHz.
External USB port for USB wifi ^^ rtlsdr stick ^^Usb to Serial connect Nextion 2. x-3. x tft screen
OLED: I2C 128*64px
SDCard: 32gb
Charging cable: Micro USB can transfer data, support 5V2A
DOCS: Manual&software
wiki. friendlyelec. com/wiki/index. php/NanoPi_NEO
wiki. friendlyelec. com/wiki/index. php/NanoHat_OLED
**Modem TYPE ""MMDVM_HS_NPi Hat (VR2VYE) for Nano Pi (GPIO) ""
update FW sudo pistar-vyehsflash nano_hs**
www. pistar. uk/beta/Pi-Star_NanoPi_V 4.1. 5_25-Jun-2021. zip
Package included:
1. NanoPi 512M RAM
2.
SDCard: 16-32G
3. 50cm data cable
4. NanoHat OLED
MMDVM nanopi pistar hotspot setup GUIDE:
connect RJ45 cable to hotspot, power up with 5V 2A Phone Charge
to ensure and check OLED left LED Flash (not green one) it Mean the RF board
Running if not, repower again
wait 1 minute the same router computer open http: //pi-star
mac open http: //pi-star. local
login: pi-star pass: raspberry
http: //pi-star/admin/configure. php
Radio/Modem Type: set Modem: STM32-DVM- (Pi Hat) GPIO then Save
MMDVM Display Type:
then select OLED then Save
reselect Modem: STM32-DVM- (Pi Hat) GPIO then save
you can see the OLED on
open http: //pi-star/admin/expert/edit_mmdvmhost. php
OLED Scroll set 1
Apply Changes
the base setting is ok, you can select your Digital Mode now
if every thing work well pls don't update the pi-star
FAQ:
Q: the OLED didn't Work?
A: Check the RF board the LED need flash 1s on/off, repower to let it work.
Q: the hotspot DMR didn't work?
A: go to admin live log download the log file to see what happen
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by LingGo Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...